We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Wafer-style butterfly valve with lever handle and ductile iron body

Milwaukee Valve

Milwaukee Valve HW232B Butterfly Valve Wafer 3 In

SKU CH-V2ZW-FSSTT

A wafer-style butterfly valve for 3-inch piping with ductile-iron body, Buna liner and lever handle rated to 200 psi from 10 to 180 °F

  • Wafer design fits between flanges without extra hardware
  • Lever handle provides quick manual open-close control
  • Ductile-iron body rated for 200 psi water pressure
  • Buna liner handles 10 to 180 degrees F fluid range
  • Meets MSS-SP25, API-609 and MSS-SP67 standards

Milwaukee Valve HW232B Butterfly Valve

The Milwaukee Valve HW232B is a wafer-style butterfly valve built for water systems that need reliable on-off control. It fits a 3-inch pipe and uses a lever handle for quick manual operation. The ductile iron body and nickel-plated disc resist wear in commercial and industrial piping. Installers who want a compact valve between flanges will find it straightforward.

Build Integration

The wafer body slides between two flanges and uses two bolt holes on a 6-inch bolt circle with 5/8-11 lug threads. No extra flange bolts are required beyond the standard pattern. The Buna liner handles water from 10 to 180 degrees Fahrenheit. The valve frees up space compared with lug or flanged designs because it does not need its own bolt holes.

Sustained Load Behaviour

The valve is rated for a maximum water pressure of 200 psi and meets MSS-SP25, API-609 and MSS-SP67 standards. Under continuous pressure the ductile iron body and nickel-plated disc maintain a tight seal through the full temperature range. The lever handle stays operable after repeated cycling. Buyers who need automated actuation or higher pressure ratings will need a different valve.

Highlights

  • Wafer design fits between flanges without extra hardware
  • Lever handle provides quick manual open-close control
  • Ductile-iron body rated for 200 psi water pressure
  • Buna liner handles 10 to 180 degrees F fluid range
  • Meets MSS-SP25, API-609 and MSS-SP67 standards

Specifications

BrandMILWAUKEE VALVE

Questions about this item

How long will the ductile iron body and Buna liner hold up when the valve runs continuously at 200 psi?

The body is ductile iron rated for 200 psi water pressure and the Buna liner handles 10 to 180 °F, so sustained operation stays within those limits.

Does the lever handle or valve body get hot or noisy during all-day operation?

The wafer valve has no motor or moving actuator; the lever is manual and the body simply conducts the fluid temperature of 10 to 180 °F.

What flange standard and bolt pattern must my piping already have for this 3-inch wafer valve?

The valve matches MSS-SP25 and API-609 with a 6-inch bolt circle and two 5/8-11 lug holes for standard 3-inch flanges.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.