Milwaukee Valve
Milwaukee Valve bath faucet part
A stainless-steel manual ball valve rated 2,000 psi for water and combustible gases with a locking handle
- TypeOther
- Manual two-way flow control for combustible gases and water
- One-piece stainless steel body rated to 2,000 psi operating pressure
- Locking handle prevents accidental operation
- Carbon steel ball with standard port design
- Vacuum service rated to 29.92 in Hg
Manual two-way ball valve
This manual two-way ball valve is built for controlling combustible gases and water in industrial piping systems. Its one-piece stainless steel body and carbon steel ball with standard port provide a straight flow path. The locking handle helps prevent accidental operation during service. It suits installers who need a fire-safe rated valve with a 2,000 psi operating pressure limit.
Pressure ratings and vacuum service
The valve handles up to 2,000 psi operating pressure and 150 psi steam pressure. Combustible gas pressure is not rated by the manufacturer. Vacuum service is rated to 29.92 in Hg, allowing use in suction lines. No 3-A sanitary standard compliance or surface roughness data is provided, so it is not intended for hygienic process applications.
Locking handle and fire-safe construction
The locking handle secures the valve in open or closed position without extra hardware. Fire-safe construction meets the supplier's fire-safe designation for critical shutdown scenarios. No actuation accessories, position indicators or mounting kits are included with the valve body. Buyers who need automated actuation or sanitary tri-clamp ends should select a different model.
Highlights
- Manual two-way flow control for combustible gases and water
- One-piece stainless steel body rated to 2,000 psi operating pressure
- Locking handle prevents accidental operation
- Carbon steel ball with standard port design
- Vacuum service rated to 29.92 in Hg
Specifications
| Brand | MILWAUKEE VALVE |
|---|---|
| Type | Other |
Questions about this item
How is the 3/8" FNPT stainless-steel ball valve installed and what step is often missed?
Thread the valve onto 3/8" FNPT pipe using PTFE tape or pipe sealant on male threads; the step often missed is tightening to the correct torque so the one-piece body seals at 2,000 psi without distortion.
What maintenance or replacement will the carbon-steel ball and locking handle need later?
Inspect the carbon-steel ball and seats annually for wear or corrosion; replace the valve if leakage appears or if the locking handle no longer holds position under 2,000 psi service.
What limit appears first during sustained high-pressure use?
The 2,000 psi operating-pressure rating is the first limit; sustained pressure above this value can deform the one-piece stainless-steel body and carbon-steel ball, causing loss of seal.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
PU Leather Square Tissue Box Holder Magnetic Closure Black Vertical Stripes
$21.99
0.00025732BTC
In stock
