We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Brass 1-inch sweat ball valve with locking handle

Milwaukee Valve

Milwaukee Valve BA-485BLL 1" Manual 2-Way Ball Valve Sweat Brass

SKU CH-2J0Z-SDR3X

Controls water and combustible gas flow with a 1 in full-port brass ball valve rated to 600 psi

  • TypeOther
  • Full-port design maximises flow capacity
  • Chrome-plated brass ball resists corrosion and wear
  • 600 psi pressure rating handles demanding water and gas lines
  • Locking handle prevents accidental operation
  • Vacuum-rated to 29.92 in Hg for negative-pressure systems

1-Inch Brass Ball Valve

The Milwaukee Valve BA-485BLL is a manual two-way ball valve built from brass with a chrome-plated brass ball. It uses a straight, two-piece body and sweat connections for a 1-inch nominal pipe size. The full-port design allows unrestricted flow for water or combustible gases. A locking handle secures the valve in the open or closed position.

Ideal for Standard Plumbing and Gas Lines

This valve suits installers needing a 600 psi rated shut-off for water or combustible gas systems where a sweat joint is required. The locking handle adds safety for applications requiring a fixed position. Buyers needing a threaded, flanged, or press-fit connection should look elsewhere. It is also not rated for steam service or 3-A sanitary standards.

600 PSI Maximum Operating Pressure

The 600 psi pressure rating is the primary specification that determines if this valve fits the system design. It defines the safe working limit for water and gas lines at standard temperatures. The valve also holds a vacuum rating of 29.92 in Hg. Verify the system pressure does not exceed this limit before installation.

Highlights

  • Full-port design maximises flow capacity
  • Chrome-plated brass ball resists corrosion and wear
  • 600 psi pressure rating handles demanding water and gas lines
  • Locking handle prevents accidental operation
  • Vacuum-rated to 29.92 in Hg for negative-pressure systems

Specifications

BrandMILWAUKEE VALVE
TypeOther

Questions about this item

Does the valve body get hot or vibrate when water flows through it all day?

The brass body conducts fluid temperature but the valve itself has no moving parts that generate heat or noise during continuous operation.

What piping tools and fittings are needed to sweat this 1 in valve into copper lines?

You need a propane or MAPP torch, lead-free solder, flux, emery cloth and two 1 in copper sweat couplings or straight pipe ends prepared for soldering.

Will the full-port chrome-plated ball restrict flow in an older 1 in copper system?

The full-port design matches the nominal 1 in bore so it adds no measurable restriction compared with the existing copper piping.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.