We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Brass swing check valve with sweat connections, inline horizontal or vertical mount

Milwaukee Valve

Milwaukee Valve 968000200 2" Solder Brass Swing Check Valve

SKU CH-Y1RT-BNK34

A 2-inch solder brass swing check valve with a 0.1 psi cracking pressure, 131 gpm flow capacity, and 200 psi maximum water pressure rating at 150°F

  • TypeOther
  • Low-lead brass construction meets potable-water standards
  • 1 psi cracking pressure opens with minimal flow
  • 131 gpm full-flow capacity handles high-demand lines
  • Rated 200 psi at 150 °F for reliable service
  • Installs horizontally or vertically with sweat connections

2" Solder Brass Swing Check Valve

This Milwaukee Valve 968000200 is a 2-inch solder low-lead brass swing check valve designed for plumbing systems requiring backflow prevention. It suits installers working on residential or commercial water lines where a reliable inline swing mechanism is needed. The sweat-by-sweat connection simplifies copper pipe installation. It operates in horizontal or vertical mounting orientations.

131 gpm flow with 0.1 psi cracking pressure

The valve delivers a full-flow rating of 131 gallons per minute while opening at a low cracking pressure of 0.1 psi, providing ample headroom for typical water supply demands. Brass seat and seal materials maintain a metal-to-metal seal under pressures up to 200 psi at 150 degrees Fahrenheit. Steam service is not rated, limiting use to water applications within the stated pressure range.

Brass body handles -20 to 150 degrees F

The all-brass body and inline swing design withstand temperatures from -20 degrees F to 150 degrees F without external power or moving parts beyond the hinge pin. No electrical components mean silent operation and zero standby draw. The low-lead brass construction meets potable water requirements while resisting corrosion in normal service conditions.

Highlights

  • Low-lead brass construction meets potable-water standards
  • 1 psi cracking pressure opens with minimal flow
  • 131 gpm full-flow capacity handles high-demand lines
  • Rated 200 psi at 150 °F for reliable service
  • Installs horizontally or vertically with sweat connections

Specifications

BrandMILWAUKEE VALVE
TypeOther

Questions about this item

Will the 2" sweat connections on this brass swing check valve mate with my existing copper piping?

The valve uses sweat-by-sweat ends sized for 2 in copper tube, so it solders directly to the same diameter pipe you already have.

How can I confirm the valve is sealing properly after I solder it in?

Pressurise the line up to 200 psi at 150 °F; the metal seat should hold with no leakage past the disc.

Does the box include any gaskets or solder, or must I supply those myself?

Only the valve body is supplied; you provide solder, flux and any pipe-prep materials.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.