Advance Tabco
Advance Tabco FC-1-1818-X Wall Mounted Sink 18 in x 18 in, 304
- Silver
$790.99
0.00945086BTC
In stock
Milwaukee Valve
Milwaukee Valve 582 1-1/4" Globe Valve Bronze FNPT 600 psi
Bronze globe valve with FNPT connections rated for 600 psi fluid and 300 psi steam service
- Size1-1/4"
- TypeOther
- Hand-wheel operation gives direct manual control
- Bronze body resists corrosion in fluid and steam lines
- Rated for 600 psi fluid pressure at 550 °F
- FNPT threaded ends allow quick pipe installation
- Class 300 rating suits high-pressure steam up to 300 psi
1-1/4" Bronze Globe Valve
The Milwaukee Valve 582 is a 1-1/4 inch bronze globe valve with FNPT connections designed for fluid and steam control in commercial and industrial piping systems. Its rising stem and hand-wheel operation provide reliable manual regulation for installers and maintenance crews.
Pressure Ratings and Temperature Limits
Rated at 600 psi for fluid and 300 psi for steam, the valve handles typical process pressures while the 550 degree Fahrenheit maximum fluid temperature suits high-temperature lines. It is not rated for compressed air service, so air systems require a different valve class.
Rising Stem and Hand-Wheel Design
The bronze rising stem moves visibly with the hand wheel, giving operators immediate position feedback without additional instrumentation. This mechanical simplicity reduces failure points compared to actuated alternatives, though it requires manual access for every adjustment.
Highlights
- Hand-wheel operation gives direct manual control
- Bronze body resists corrosion in fluid and steam lines
- Rated for 600 psi fluid pressure at 550 °F
- FNPT threaded ends allow quick pipe installation
- Class 300 rating suits high-pressure steam up to 300 psi
Specifications
| Brand | MILWAUKEE VALVE |
|---|---|
| Size | 1-1/4" |
| Type | Other |
Questions about this item
Will the 1-1/4" FNPT threads on this bronze globe valve match my existing 1-1/4" NPT piping?
Yes, the valve uses FNPT x FNPT connections sized for 1-1/4" pipe, so standard NPT male threads will engage correctly.
How can I confirm the rising stem and hand wheel are operating properly after installation?
Turn the hand wheel; the stem should rise visibly as the valve opens and lower as it closes, giving a clear visual indication of disc position.
Does the valve come with any gaskets, sealant or flange hardware, or must I supply those separately?
The valve is supplied as the bronze body with rising stem and hand wheel only; pipe sealant, gaskets and any mating flanges or nipples are not included.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
