Advance Tabco
Advance Tabco FC-1-1818-X Wall Mounted Sink 18 in x 18 in, 304
- Silver
$790.99
0.00936515BTC
In stock
Milwaukee Valve
Milwaukee Valve 504 3/4 Angle Globe Valve Class 125 FNPT
Bronze angle globe valve with 3/4 inch FNPT connections handles fluid and steam up to 353 degrees Fahrenheit and 125 psi steam pressure
- Size3/4"
- TypeOther
- Bronze body resists corrosion for long service life
- 200 psi fluid rating handles demanding plumbing systems
- 125 psi steam rating suits heating applications
- Rising stem design shows valve position at a glance
- 353 °F maximum temperature withstands hot water and steam
Bronze Angle Globe Valve
The Milwaukee Valve 504 is a 3/4 inch Class 125 angle globe valve with FNPT connections. Bronze body construction handles fluid and steam in residential or light commercial plumbing. Rising stem design with hand wheel provides clear visual indication of valve position. Rated for 200 psi fluid pressure and 125 psi steam working pressure.
Installers needing threaded bronze angle valves
Suits technicians who require a 3/4 inch FNPT angle globe valve for hot water or steam lines up to 353 degrees Fahrenheit. Not for installers who need larger pipe sizes, flanged connections or higher pressure ratings. Buyers seeking air-rated valves or different body materials should look elsewhere.
353 degrees Fahrenheit maximum fluid temperature
This temperature limit determines whether the valve matches the system's operating conditions. Steam service is rated at 125 psi WSP while fluid service handles 200 psi. The 1 1/4 inch inlet to outlet length and 3 15/16 inch handle height define the installation envelope.
Highlights
- Bronze body resists corrosion for long service life
- 200 psi fluid rating handles demanding plumbing systems
- 125 psi steam rating suits heating applications
- Rising stem design shows valve position at a glance
- 353 °F maximum temperature withstands hot water and steam
Specifications
| Brand | MILWAUKEE VALVE |
|---|---|
| Size | 3/4" |
| Type | Other |
Questions about this item
What does the 200 psi fluid-pressure rating mean once the valve is installed?
The valve is rated to hold 200 psi of non-shock cold water, oil or gas at up to 353 °F in the pipeline.
How does the FNPT connection standard limit what I can thread onto it?
FNPT threads seal with a taper; both ports are female, so you need 3/4 in male NPT nipples or adapters to make the joint.
What clearance does the 3 15/16 in handle-to-center height require for mounting?
Allow at least 3 15/16 in from the pipe centre-line to the nearest obstruction so the hand wheel can turn freely.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
