We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Cast iron gate valve with bronze wheel handle, bolted bonnet, OS&Y stem

Milwaukee Valve

Milwaukee Valve 2885-M Gate Valve 200 psi 125 psi 335 Cv

SKU CH-QBSC-VMBYN

Cast iron gate valve handles gas, oil and water at 200 psi with a 335 Cv flow coefficient

  • TypeOther
  • Rated for 200 psi gas, oil or water service
  • Steam duty up to 125 psi for heating systems
  • 335 Cv flow coefficient minimises pressure drop
  • Cast iron body with bronze seat resists corrosion
  • OS&Y brass stem gives visible open/closed indication

Cast Iron Gate Valve for Gas Oil Water

This cast iron gate valve handles gas oil and water in commercial and industrial piping systems. The bolted bonnet and outside screw yoke stem suit maintenance crews who need reliable shutoff with visible stem position.

ANSI Class 125 Flange 200 psi Rating

The valve carries a 200 psi operating pressure rating and a 125 psi steam rating at ANSI Class 125 flange standard. Bronze seat and seal materials resist wear while the brass stem reduces friction during normal cycling.

335 Cv Flow Capacity Under Sustained Load

A 335 Cv coefficient delivers high flow capacity during continuous service without excessive pressure drop. The solid cast iron wedge maintains sealing integrity over long periods of operation in demanding environments.

Highlights

  • Rated for 200 psi gas, oil or water service
  • Steam duty up to 125 psi for heating systems
  • 335 Cv flow coefficient minimises pressure drop
  • Cast iron body with bronze seat resists corrosion
  • OS&Y brass stem gives visible open/closed indication

Specifications

BrandMILWAUKEE VALVE
TypeOther

Questions about this item

How do I install the 2885-M gate valve with its ANSI Class 125 flanges and what step is often missed?

Align the bolted bonnet flanges with the mating pipe flanges, insert gaskets, and tighten bolts in a star pattern to the specified torque; the step often missed is re-torquing after the first thermal cycle.

What maintenance will the bronze seats and brass stem of the 2885-M require over time?

Inspect the bronze seat and seal faces for erosion or wire-draw, lubricate the outside screw and yoke stem threads annually, and repack the gland if leakage appears around the stem.

At what pressure limit does the 2885-M reach its maximum rating during sustained steam service?

The valve is rated for 125 psi maximum steam pressure; sustained operation at or above this limit will reach the design ceiling first.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.