We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Bronze swing check valve, sweat connections, 3.3125 in long

Milwaukee Valve

Milwaukee Valve 1510T 3/4 Swing Check Valve 3.3125 in

SKU CH-E9QE-8JZVV

A 3/4-inch bronze swing check valve with sweat connections, PTFE seal, 18 gpm flow and 300 psi water rating

  • Size3/4"
  • TypeOther
  • Reliable flow control with 18 gpm capacity
  • Handles extreme heat up to 406 degrees F
  • Operates in freezing conditions down to -20 degrees F
  • Withstands 300 psi water pressure at 150 degrees F
  • PTFE seal resists chemicals and high temperatures

Product Identity

The Milwaukee Valve 1510T is a 3/4 inch bronze swing check valve designed for residential and light commercial plumbing systems. It prevents backflow in water and steam lines with a 0.750 to 1.000 psi cracking pressure. The valve handles up to 300 psi water pressure at 150 degrees F and 150 psi steam pressure.

Installation Notes

Sweat connections on both ends require copper pipe soldering skills and proper flux application for leak-free joints. The inline swing mechanism allows horizontal or vertical mounting with flow direction clearly marked. PTFE seals resist degradation but demand clean pipe ends to avoid debris preventing full closure.

Suitability

This valve suits plumbers and facility managers needing reliable backflow prevention in hydronic heating, potable water or low-pressure steam circuits. The 18 gpm flow capacity fits standard 3/4 inch service lines. Installers requiring threaded, press-fit or flanged connections must select a different model. Those needing a lift-check mechanism for rapid cycling applications should consider alternative designs.

Highlights

  • Reliable flow control with 18 gpm capacity
  • Handles extreme heat up to 406 degrees F
  • Operates in freezing conditions down to -20 degrees F
  • Withstands 300 psi water pressure at 150 degrees F
  • PTFE seal resists chemicals and high temperatures

Specifications

BrandMILWAUKEE VALVE
Size3/4"
TypeOther

Questions about this item

How do I verify the valve is sealing properly after I sweat it into the line?

Pressurise the system up to 300 psi water pressure at 150 °F and confirm no leakage past the bronze seat while flow moves in the correct direction.

What comes in the package and what extra fittings or sealant must I purchase?

The box contains only the 3/4 in bronze swing check valve with PTFE seal; sweat copper tubing, flux, solder and any required hangers are sold separately.

Should I choose the horizontal or vertical mounting version for my installation?

This single model 1510T is rated for both horizontal and vertical mounting orientations, so select it regardless of pipe run direction.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.