Advance Tabco
Advance Tabco FC-1-1818-X Wall Mounted Sink 18 in x 18 in, 304
- Silver
$790.99
0.00939753BTC
In stock
Milwaukee Valve
Milwaukee Valve 149 1-1/4 Gate Valve Class 125 200 psi
A 1-1/4 inch bronze gate valve rated for 200 psi water, oil and gas service with a 97 Cv flow coefficient
- Size1-1/4"
- Reliable flow control for gas oil water systems with Class 125 rating
- Durable bronze construction resists corrosion across stem wedge seat and bonnet
- Rising stem design provides clear visual indication of valve position
- High 97 Cv coefficient enables efficient volume handling in 1-1/4 inch lines
- Rated for 200 psi operating pressure and 125 psi steam service
Valve for gas oil and water
This Milwaukee Valve 149 gate valve controls flow of gas, oil or water in residential and light commercial plumbing. The bronze body and solid bronze wedge suit Class 125 service with a 200 psi operating limit and 125 psi steam rating. It is intended for installers who need a reliable rising-stem valve with sweat connections.
Bronze components and rising stem
All pressure-bearing parts including stem, wedge, seat, seal and bonnet are bronze, providing consistent corrosion resistance across the assembly. The screw-in bonnet simplifies maintenance while the wheel handle gives clear visual indication of valve position. A Cv of 97 supports full-port flow capacity for the nominal size.
Sweat connection installation notes
The sweat ends require proper copper tube preparation and soldering technique to achieve a leak-free joint. Overheating can damage the bronze seat and seals, so heat control is critical. The rising stem needs adequate clearance above the valve for full operation, and the screw-in bonnet should be checked for correct thread engagement before pressurising.
Highlights
- Reliable flow control for gas oil water systems with Class 125 rating
- Durable bronze construction resists corrosion across stem wedge seat and bonnet
- Rising stem design provides clear visual indication of valve position
- High 97 Cv coefficient enables efficient volume handling in 1-1/4 inch lines
- Rated for 200 psi operating pressure and 125 psi steam service
Specifications
| Brand | MILWAUKEE VALVE |
|---|---|
| Size | 1-1/4" |
Questions about this item
Will the bronze stem and wedge need periodic lubrication or replacement over time?
The rising bronze stem and solid bronze wedge are built into the valve body; normal service does not call for scheduled lubrication or planned replacement of these parts.
What pressure limit is reached first when the valve handles steam continuously?
The steam rating caps at 125 psi, which is lower than the 200 psi cold-working limit, so steam pressure becomes the governing constraint.
How much heat does the bronze body radiate when the valve runs at 200 psi all day?
The valve is a passive bronze component with no internal power source, so it generates no measurable heat during continuous operation.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
