We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Bronze gate valve with rising-stem wheel handle, 3/8 inch NPT female connections

Milwaukee Valve

Milwaukee Valve 1182 3/8" Gate Valve Class 300 bathware

SKU CH-XKY6-ERGDK

Bronze gate valve with rising stem and NPT connection handles gas, oil and water up to 1,000 psi

  • Size3/8"
  • TypeOther
  • Reliable flow control for gas, oil or water
  • Class 300 rating handles 300 psi steam pressure
  • Bronze body and wedge resist corrosion in harsh media
  • Rising stem design gives clear visual position indication
  • Cv 10.7 coefficient supports efficient system performance

Gate Valve for Gas Oil Water

The Milwaukee Valve 1182 is a 3/8-inch bronze gate valve rated for gas oil and water service. It suits plumbers and maintenance engineers who need a rising-stem valve with a solid bronze wedge and copper-nickel seats for reliable shut-off in industrial or commercial piping.

Thermals Noise and Power Draw

The valve body and bonnet are bronze with a union bonnet style and a bronze wheel handle for manual operation. Maximum operating pressure is 1,000 psi and steam pressure is 300 psi while the coefficient of volume is 10.7. No external power source is required so there is no electrical draw or fan noise.

NPT Female Connection Benefits

The 3/8-inch female NPT threads on both sides allow direct installation into standard pipe fittings without adapters. The rising stem gives a clear visual indication of open or closed position while the bronze seal material resists wear in water oil and gas applications.

Highlights

  • Reliable flow control for gas, oil or water
  • Class 300 rating handles 300 psi steam pressure
  • Bronze body and wedge resist corrosion in harsh media
  • Rising stem design gives clear visual position indication
  • Cv 10.7 coefficient supports efficient system performance

Specifications

BrandMILWAUKEE VALVE
Size3/8"
TypeOther

Questions about this item

How do I install the 3/8" NPT female connections on the 1182 gate valve without stripping the bronze threads?

Wrap PTFE tape or apply pipe dope on the male threads only, then hand-tighten before a final quarter-turn with a wrench; the union bonnet lets you align the wheel after the body is secured.

Which component of the 1182 gate valve will need replacement first in water service?

The copper-nickel seats and bronze seals wear before the solid bronze wedge; inspect them during routine shutdowns and swap the seat rings if leakage appears at the wedge face.

At what pressure does the 1182 gate valve hit its limit during sustained steam duty?

The 300 psi steam rating is the first ceiling you reach; operating above it risks seat deformation and bonnet joint weep even though the body handles 1,000 psi cold water.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.