Advance Tabco
Advance Tabco FC-1-1818-X Wall Mounted Sink 18 in x 18 in, 304
- Silver
$790.99
0.00920644BTC
In stock
Milwaukee Valve
Milwaukee Valve 1182 2" Gate Valve Class 300
A 2-inch bronze gate valve rated for 1,000 psi water and oil service with 300 psi steam capacity and a 230 Cv flow coefficient
- Size2"
- TypeOther
- Reliable flow control for gas, oil and water with bronze body construction
- Handles up to 1,000 psi operating pressure and 300 psi steam rating
- High capacity flow with Cv 230 coefficient of volume
- Rising stem design with bronze stem and solid bronze wedge
- Female NPT connections for straightforward installation
2" Bronze Gate Valve Class 300
The Milwaukee Valve 1182 is a bronze gate valve designed for controlling gas, oil, and water in industrial piping systems. It features a 2-inch nominal size with NPT female connections and a rising stem with a handwheel operator for manual flow control.
1000 psi rating and 230 Cv capacity
The valve handles non-shock cold working pressure up to 1,000 psi and saturated steam pressure up to 300 psi. Its solid bronze wedge and copper-nickel seats provide a 230 coefficient of volume for high flow capacity, suitable for demanding media service.
Union bonnet with bronze construction
The union-style bonnet allows for easier maintenance access to internal components without removing the valve from the pipeline. All primary wetted parts including body, bonnet, stem, wedge, and seals are bronze for consistent material compatibility.
Highlights
- Reliable flow control for gas, oil and water with bronze body construction
- Handles up to 1,000 psi operating pressure and 300 psi steam rating
- High capacity flow with Cv 230 coefficient of volume
- Rising stem design with bronze stem and solid bronze wedge
- Female NPT connections for straightforward installation
Specifications
| Brand | MILWAUKEE VALVE |
|---|---|
| Size | 2" |
| Type | Other |
Questions about this item
Will the 2 in NPT threads on this gate valve match the 2 in NPT fittings already on my copper piping?
Yes, the valve uses 2 in female NPT connections on both ends, so it threads directly onto standard 2 in male NPT pipe nipples or adapters.
How can I confirm the rising stem is operating correctly after installation?
Open the handwheel and watch the stem rise visibly; the stem should move smoothly upward without binding and the wedge should seat fully when the wheel is turned clockwise to close.
Does the box include flange gaskets or bolts, or must I supply them separately?
The valve has NPT threaded ends, not flanged ends, so no flange gaskets or bolts are needed or included; you only need pipe thread sealant or tape for the NPT connections.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
