Advance Tabco
Advance Tabco FC-1-1818-X Wall Mounted Sink 18 in x 18 in, 304
- Silver
$790.99
0.00917292BTC
In stock
Milwaukee Valve
Milwaukee Valve 1150 3/8" Gate Valve Class 150
A bronze gate valve for gas, oil or water lines, rated 300 psi with a rising stem and 10.7 Cv flow capacity
- Size3/8"
- TypeOther
- Reliable flow control for gas, oil and water up to 300 psi
- Bronze body, wedge and seat resist corrosion in harsh media
- Rising-stem design gives clear visual indication of valve position
- 7 Cv rating delivers strong flow capacity for 3/8 in piping
- Screw-in bonnet and NPT threads simplify installation and maintenance
Bronze Gate Valve for Gas Oil Water
This Milwaukee Valve 1150 is a 3/8 inch bronze gate valve rated for Class 150 service. It handles gas oil and water with a solid bronze wedge and rising stem. The wheel handle operates a screw-in bonnet for reliable shut-off in plumbing and light industrial lines. Female NPT threads connect directly to standard piping.
Suits low-pressure steam and liquid lines
Builders needing a compact bronze valve for 300 psi non-shock cold working pressure or 150 psi steam will find this a direct fit. It is not for applications that require flanged connections or larger bore sizes. Systems demanding automated actuation or high-cycle service should look at different valve types.
10.7 Cv flow capacity with 300 psi headroom
The 10.7 coefficient of volume delivers full flow for 3/8 inch supply branches. Pressure headroom reaches 300 psi for water oil and gas while steam service stops at 150 psi. Beyond those limits the bronze seat and seal materials will not maintain tight shut-off.
Highlights
- Reliable flow control for gas, oil and water up to 300 psi
- Bronze body, wedge and seat resist corrosion in harsh media
- Rising-stem design gives clear visual indication of valve position
- 7 Cv rating delivers strong flow capacity for 3/8 in piping
- Screw-in bonnet and NPT threads simplify installation and maintenance
Specifications
| Brand | MILWAUKEE VALVE |
|---|---|
| Size | 3/8" |
| Type | Other |
Questions about this item
What piping connection does the 1150 gate valve require on the inlet side?
The valve has a 3/8 inch female NPT thread on side one, so the mating pipe or fitting must carry a matching male NPT thread.
Can the bronze body and trim handle the same 300 psi rating when the system carries steam?
Steam service is limited to 150 psi even though the cold working pressure reaches 300 psi.
How can I confirm the rising stem is operating correctly after installation?
Turn the handwheel and watch the stem rise and lower smoothly through the full travel; the wedge should seat fully when the stem is down.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
