Advance Tabco
Advance Tabco FC-1-1818-X Wall Mounted Sink 18 in x 18 in, 304
- Silver
$790.99
0.00941431BTC
In stock
Milwaukee Valve
Milwaukee Valve 1150 1/4 Gate Valve Class 150 300 psi
A quarter-inch bronze gate valve rated for 300 psi water and 150 psi steam service up to 406 °F
- Size1/4"
- TypeOther
- Class 150 rating supports 300 psi cold water pressure
- Rising stem design shows valve position at a glance
- Bronze body and wedge resist corrosion in plumbing systems
- Hand-wheel handle allows precise manual flow control
- MSS-SP-80 compliance confirms industrial-grade manufacturing standards
Milwaukee Valve 1150 Gate Valve
This Milwaukee Valve 1150 is a 1/4 inch gate valve rated Class 150 for plumbing installations. It handles cold water pressure up to 300 psi and steam pressure up to 150 psi. The bronze body and rising stem suit residential and light commercial water or steam lines.
Installation uses FNPT threaded connections
Thread the valve onto male NPT fittings with suitable sealant for a leak-free joint. The rising stem design requires vertical clearance above the hand wheel for full operation. Over-tightening the threaded bonnet can damage the bronze threads.
Verify your system pressure
Ensure the maximum working pressure does not exceed 300 psi for water or 150 psi for steam. Confirm the fluid temperature stays below 406 degrees Fahrenheit. This valve is not suited for applications needing larger pipe diameters or flanged connections.
Highlights
- Class 150 rating supports 300 psi cold water pressure
- Rising stem design shows valve position at a glance
- Bronze body and wedge resist corrosion in plumbing systems
- Hand-wheel handle allows precise manual flow control
- MSS-SP-80 compliance confirms industrial-grade manufacturing standards
Specifications
| Brand | MILWAUKEE VALVE |
|---|---|
| Size | 1/4" |
| Type | Other |
Questions about this item
How can I verify the gate valve is operating correctly after installation?
Turn the hand wheel clockwise to close and counter-clockwise to open; the rising stem should move visibly up and down, confirming the bronze wedge is seating and unseating properly.
What comes with the valve and what must I supply separately?
The valve body with threaded bonnet, bronze stem, bronze wedge, and malleable iron hand wheel are included; you must supply compatible 1/4 inch FNPT pipe fittings and thread sealant.
Which pressure rating should I select for my application?
Choose this Class 150 model rated for 300 psi cold water pressure and 150 psi working steam pressure if your system operates within those limits and requires a 1/4 inch FNPT connection.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
