We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Bronze gate valve with wheel handle, 3/8 inch sweat connection

Milwaukee Valve

Milwaukee Valve 115 3/8 Gate Valve Class 125

SKU CH-BVFQ-GHQGF

Bronze gate valve controls gas, oil or water flow up to 200 psi with a non-rising stem and sweat connection

  • Size3/8"
  • TypeOther
  • Reliable shut-off for gas, oil or water
  • Bronze body and trim resist corrosion in wet systems
  • 200 psi working pressure handles demanding lines
  • 125 psi steam rating suits heating circuits
  • 7 Cv delivers strong flow through 3/8 in sweat connection

Bronze Gate Valve for Gas Oil Water

This 3/8 inch bronze gate valve handles gas oil and water up to 200 psi operating pressure and 125 psi steam. A solid bronze wedge and bronze seat provide reliable shutoff in residential and light commercial piping. The screw-in bonnet and non-rising stem simplify installation in tight spaces.

Suitable for sweat copper connections only

Installers who need threaded flanged or press-fit ends must choose a different valve body. Systems requiring rising-stem indication or higher pressure ratings will not be served by this model. The sweat connection limits use to copper tubing assemblies.

Class 125 rating with 10.7 Cv flow coefficient

The ANSI Class 125 designation and 10.7 Cv determine whether this valve meets the pressure and flow requirements of the circuit. Verify both values against the system design before purchase.

Highlights

  • Reliable shut-off for gas, oil or water
  • Bronze body and trim resist corrosion in wet systems
  • 200 psi working pressure handles demanding lines
  • 125 psi steam rating suits heating circuits
  • 7 Cv delivers strong flow through 3/8 in sweat connection

Specifications

BrandMILWAUKEE VALVE
Size3/8"
TypeOther

Questions about this item

What pipe size and connection type must already be in place for the 3/8" sweat-end gate valve to install correctly?

The valve requires a 3/8" nominal copper tube with a sweat (solder) joint on each end, so the existing piping must be 3/8" copper ready for soldering.

Will the bronze seat and wedge hold up when the valve is used alongside older bronze fittings in a 200 psi water line?

Yes — the body, bonnet, stem, wedge, seat and seal are all bronze, matching the material of older bronze fittings and rated for 200 psi non-shock cold water service.

How can I confirm the non-rising stem is operating properly after soldering the valve into the line?

Turn the handwheel several full rotations; the stem should not rise or lower, and the wedge should move smoothly to fully open or close with no binding.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.