Advance Tabco
Advance Tabco FC-1-1818-X Wall Mounted Sink 18 in x 18 in, 304
- Silver
$790.99
0.00940043BTC
In stock
Milwaukee Valve
Milwaukee Valve 115 3/4 Gate Valve Class 125 Bronze
A 3/4-inch bronze gate valve rated for 200 psi water, oil and gas service with a 32 Cv flow coefficient and non-rising stem
- Size3/4"
- TypeOther
- Reliable flow control for gas oil and water with bronze construction
- Handles up to 200 psi operating pressure for demanding installations
- Rated 125 psi steam service for heating system compatibility
- High 32 Cv coefficient delivers efficient volume throughput
- Non-rising stem with wheel handle simplifies operation in tight spaces
Gate valve for gas oil water
The Milwaukee Valve 115 is a 3/4 inch bronze gate valve rated Class 125 for gas, oil and water service. It uses a sweat connection and a non-rising stem with a wheel handle for manual operation. The solid bronze wedge and bronze seats provide compatible metallurgy throughout.
Maximum operating pressure 200 psi
The valve handles 200 psi non-shock cold working pressure and 125 psi saturated steam pressure. These ratings define the safe pressure envelope for the piping system. Exceeding either limit risks seat damage or body deformation.
Flow coefficient 32 under sustained flow
A Cv of 32 indicates the volume capacity when the valve is fully open during continuous duty. The bronze construction resists corrosion from the listed media over long periods. The screw-in bonnet maintains seal integrity without frequent retightening.
Highlights
- Reliable flow control for gas oil and water with bronze construction
- Handles up to 200 psi operating pressure for demanding installations
- Rated 125 psi steam service for heating system compatibility
- High 32 Cv coefficient delivers efficient volume throughput
- Non-rising stem with wheel handle simplifies operation in tight spaces
Specifications
| Brand | MILWAUKEE VALVE |
|---|---|
| Size | 3/4" |
| Type | Other |
Questions about this item
How does the 32 Cv flow coefficient affect water delivery in a residential plumbing run?
A Cv of 32 means the valve passes 32 US gallons per minute with a 1 psi pressure drop, so it adds very little restriction to typical household supply lines.
What does the Class 125 rating cap for steam service?
The valve is rated for a maximum of 125 psi steam pressure; operating above that limit is not supported by the design.
What pipe preparation does the sweat connection on the 3/4 inch body require?
The sweat ends need clean copper tubing, flux and solder to form a permanent leak-free joint.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
