Advance Tabco
Advance Tabco FC-1-1818-X Wall Mounted Sink 18 in x 18 in, 304
- Silver
$790.99
0.00924605BTC
In stock
Milwaukee Valve
Milwaukee Valve 115 2" Gate Valve Class 125 Solder End
A bronze gate valve with solder ends rated for 200 psi water, oil and gas service
- Size2"
- TypeOther
- Reliable flow control for gas, oil and water systems
- Bronze body and bronze wedge resist corrosion in harsh media
- 200 psi operating pressure handles demanding applications
- 125 psi steam rating suits heating installations
- Solder connection enables secure, leak-free installation
Gate Valve for Gas Oil Water
This Milwaukee Valve 115 gate valve controls flow of gas oil or water in residential and commercial piping. The bronze body and solid bronze wedge suit general-purpose service where a full-bore shut-off is required. It is intended for installers who need a solder-end connection on a two-inch line.
200 psi Operating 125 psi Steam
The valve is rated for 200 psi maximum operating pressure and 125 psi steam pressure with a flow coefficient of 230. The non-rising bronze stem and screw-in bonnet keep the packing depth constant so handle torque stays predictable during daily cycling.
Wheel Handle Solder End Connection
The hand wheel provides direct mechanical leverage without needing an actuator or external power. The sweat connection on side one is ready for copper tube soldering so the installer can join the valve without threading or flanging tools.
Highlights
- Reliable flow control for gas, oil and water systems
- Bronze body and bronze wedge resist corrosion in harsh media
- 200 psi operating pressure handles demanding applications
- 125 psi steam rating suits heating installations
- Solder connection enables secure, leak-free installation
Specifications
| Brand | MILWAUKEE VALVE |
|---|---|
| Size | 2" |
| Type | Other |
Questions about this item
How do I solder the 2" sweat connection without overheating the bronze seat?
Clean and flux both copper pipe and valve socket, support the valve body, apply heat evenly to the joint until solder flows, then cool naturally; the bronze seat and wedge tolerate normal brazing temperatures but prolonged direct flame can distort the seal surface.
Which internal part will need replacement first on a 200 psi water line?
The bronze wedge and seat interface wears first; inspect the solid bronze wedge for scoring or seat erosion during scheduled shutdowns and replace the wedge or reface the seat when leakage appears.
At what pressure does the 125 psi steam rating become the limiting factor during sustained operation?
When steam pressure reaches 125 psi the valve is at its rated limit; sustained steam service above that pressure will exceed the Class 125 design and accelerate seat and packing degradation.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
