Advance Tabco
Advance Tabco FC-1-1818-X Wall Mounted Sink 18 in x 18 in, 304
- Silver
$790.99
0.00941632BTC
In stock
Milwaukee Valve
Milwaukee Valve 105 3/8" Gate Valve Class 125 FNPT
Bronze gate valve controls gas, oil or water flow up to 200 psi with a non-rising stem and solid wedge
- Size3/8"
- TypeOther
- Bronze construction resists corrosion for gas, oil and water service
- Class 125 rating handles 200 psi operating and 125 psi steam pressure
- Non-rising stem saves installation space in tight piping runs
- Solid bronze wedge ensures positive shut-off and long service life
- Cv 10.7 provides high flow capacity through 3/8 in FNPT connection
3/8" Bronze Gate Valve for Fluid Control
This Milwaukee Valve 105 is a Class 125 bronze gate valve with female NPT threads. It is built for residential and light commercial plumbing where a full-port shut-off is required. The non-rising stem and screw-in bonnet suit installations with limited vertical space. Wheel handle operation provides reliable manual control.
Suits water, oil and gas lines up to 200 psi
Installers handling water, oil or gas at pressures up to 200 psi will find the solid bronze wedge and bronze seats durable. Steam service is limited to 125 psi. The valve is not designed for throttling or frequent cycling, so systems needing flow modulation should use a different valve type.
Cv 10.7 gives ample flow for 3/8" pipe runs
The coefficient of 10.7 allows comfortable flow rates in standard 3/8 inch piping for water, oil or gas. Headroom decreases as pressure approaches the 200 psi rating or when steam nears 125 psi. Larger diameter lines or higher capacity demands will require a bigger valve body.
Highlights
- Bronze construction resists corrosion for gas, oil and water service
- Class 125 rating handles 200 psi operating and 125 psi steam pressure
- Non-rising stem saves installation space in tight piping runs
- Solid bronze wedge ensures positive shut-off and long service life
- Cv 10.7 provides high flow capacity through 3/8 in FNPT connection
Specifications
| Brand | MILWAUKEE VALVE |
|---|---|
| Size | 3/8" |
| Type | Other |
Questions about this item
What piping must already be in place for this 3/8" FNPT gate valve to connect?
You need 3/8" male NPT threads on the pipe or fitting so the female NPT ends can screw on and seal.
How does the 200 psi rating affect use with older low-pressure water lines?
The valve handles up to 200 psi, so it will safely contain pressures well above typical residential supply without leaking.
How can I confirm the non-rising stem is operating correctly after installation?
Turn the wheel handle; the gate should move up and down inside while the stem stays at the same height.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
