We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Milspec Industries, Inc.

Milspec Industries, Inc 15' Heavy Duty 14/3 SPT-3 Low Profile Flat Extension Cord, Black

SKU CH-1WG6-4K7A8

A 15-foot flat extension cord with 14-gauge copper conductors and a low-profile jacket that lies flat to reduce tripping hazards in high-traffic areas

  • Maximum flexibility from 100% copper stranded conductors
  • Low-profile flat jacket reduces trip hazards in busy areas
  • Black finish blends into tradeshow and convention backgrounds
  • Heavy-duty flexible jacket withstands frequent use and movement
  • Moulded 15A-125V plugs with strain relief prevent cord pull-out

15-Foot Low-Profile Extension Cord

This 15-foot heavy-duty extension cord uses 14-gauge, 3-conductor SPT-3 wiring to deliver reliable power. The low-profile flat jacket lies flush against floors and carpets, reducing trip hazards in busy areas. Molded NEMA 5-15 plugs with large strain reliefs prevent the ends from pulling away from the cord body. The black finish helps the cord blend into trade-show booths, convention centres and industrial settings.

For Temporary High-Traffic Power Runs

It suits exhibitors, facility managers and AV technicians who need a durable, discreet cord that withstands frequent setup and teardown. The flat profile works well under carpet tape or along baseboards where round cables would bulge. Buyers who need a cord rated above 15 amps or 125 volts should look at a different specification. Installations requiring a locking connector or an outdoor-rated jacket are not addressed by this product.

14-Gauge Capacity With 15-Amp Headroom

The 14/3 copper conductors comfortably handle continuous loads up to the 15-amp rating at 125 volts, powering lighting rigs, workstations and display electronics without voltage drop over the full 15-foot run. Headroom runs out when the connected equipment draws more than the NEMA 5-15 limit or when the environment demands a higher temperature rating than the SPT-3 jacket provides.

Highlights

  • Maximum flexibility from 100% copper stranded conductors
  • Low-profile flat jacket reduces trip hazards in busy areas
  • Black finish blends into tradeshow and convention backgrounds
  • Heavy-duty flexible jacket withstands frequent use and movement
  • Moulded 15A-125V plugs with strain relief prevent cord pull-out

Specifications

No published specifications for this item yet.

Questions about this item

What wall outlet and device plug does this NEMA 5-15 cord need to connect?

It plugs into a standard 125 V NEMA 5-15 wall receptacle and accepts any device with a matching NEMA 5-15 plug.

Will the 14-gauge conductors handle the same load as thinner cords already in my setup?

The 14-gauge copper conductors are rated for 15 A at 125 V, so they carry more current than smaller-gauge cords on the same circuit.

How can I confirm the cord is delivering power correctly after I plug it in?

The connected equipment powers on normally and the molded plugs stay cool during use.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.