We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Air-cooled TIG torch kit with rigid neck and long back cap

Miller - Weldcraft

Miller - Weldcraft WP-26V-12-2 TIG Torch Kit A-200V Series

SKU CH-PER9-PBBV2

Air-cooled TIG torch kit rated 200 A at 60 % duty cycle with rigid neck for 0.020–5/32 in electrodes

  • TypeTools
  • 200 A maximum current handles heavy-duty TIG welding
  • 60 % duty cycle sustains output for longer runs
  • Air-cooled design eliminates separate water-cooler expense
  • Rigid neck with long back cap covers 0.020–5/32 in electrodes
  • Weldcraft A-200 series compatibility ensures versatile torch fit

Miller Weldcraft TIG Torch Kit

The Miller Weldcraft WP-26V-12-2 is a TIG torch kit from the A-200V series. It is an air-cooled assembly rated for a maximum current of 200 A with a 60 percent duty cycle. The kit includes a long back cap and features a rigid neck design. It supports electrode sizes from 0.020 in up to 5/32 in for GTAW applications.

Suited for heavy-duty air-cooled TIG work

This torch suits welders who need a heavy-duty air-cooled package compatible with the A-200 series. It is not for operators who require a water-cooled torch for higher continuous amperage. Buyers needing a flexible neck for tight joint access should look at a different configuration. The kit is also not intended for processes outside of TIG welding.

200 A maximum current at 60 percent duty cycle

The decisive specification is the 200 A maximum current combined with a 60 percent duty cycle rating. This defines the thermal limit for continuous welding before the torch requires a cooling pause. Verify that your power source and application stay within this envelope. Exceeding it will overheat the air-cooled head and shorten consumable life.

Highlights

  • 200 A maximum current handles heavy-duty TIG welding
  • 60 % duty cycle sustains output for longer runs
  • Air-cooled design eliminates separate water-cooler expense
  • Rigid neck with long back cap covers 0.020–5/32 in electrodes
  • Weldcraft A-200 series compatibility ensures versatile torch fit

Specifications

BrandMILLER ELECTRIC
TypeTools

Questions about this item

What duty cycle does the WP-26V-12-2 torch deliver at its 200 A rating?

The torch is rated for a 60 percent duty cycle at 200 A, meaning it can weld continuously for six minutes out of every ten before it must cool down.

How hot or loud does the air-cooled torch get during a full-day shift?

Because it is air-cooled with no built-in fan, the body and cable warm steadily under load; expect noticeable heat on the handle and cable after prolonged runs at 200 A, and only the faint hiss of shielding gas — no mechanical noise.

Which power source and gas supply are required to run this A-200V series kit?

You need a TIG-capable power source that can deliver up to 200 A with a compatible A-200 series connector, plus an argon or argon-helium gas cylinder, regulator and flow meter to provide shielding gas.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.