Miller - Weldcraft
Miller - Weldcraft 45V10R Braided Rubber Gas Hose 25 Ft (7.6m)
Braided rubber gas hose, 25 ft length, compatible with numerous TIG torch models including series 17, 20, 24, 25, 26 and 9
- TypeTools
- Braided rubber construction resists kinks and abrasion during welding
- 25 ft length gives extended reach around the work area
- Compatible with Series 17, 20, 22, 24, 25, 26 and 9 torches
- Fits WP-17, WP-20, WP-24W, WP-26 and WP-9 torch models
- Prop 65 listed for cancer and reproductive-harm awareness
Braided Rubber Gas Hose 25 Ft
This 25-foot braided rubber gas hose carries shielding gas from the supply to compatible TIG torches. It is built for welders who need a durable, flexible connection on workshop or site jobs. The hose is supplied new and ready for immediate installation on supported equipment.
Construction and Daily Fit
The braided rubber cover resists abrasion and kinking while staying pliable during torch movement. Standard fittings match the connection points on Series 17, 20, 22, 24, 25, 26 and 9 torch bodies as well as listed HW and WP models, so the hose threads on without adapters. California Proposition 65 warnings apply to chemicals in the hose material.
Replacing Worn Gas Lines
This hose replaces cracked, stiff or leaking original lines on the compatible torch series, restoring consistent gas coverage and reducing porosity in welds. The 25-foot length suits stations where the gas source is set back from the work area; shorter runs may not need the full reach.
Highlights
- Braided rubber construction resists kinks and abrasion during welding
- 25 ft length gives extended reach around the work area
- Compatible with Series 17, 20, 22, 24, 25, 26 and 9 torches
- Fits WP-17, WP-20, WP-24W, WP-26 and WP-9 torch models
- Prop 65 listed for cancer and reproductive-harm awareness
Specifications
| Type | Tools |
|---|---|
| Brand | MILLER ELECTRIC |
Questions about this item
What torch series does the 45V10R hose connect to?
The hose is compatible with Series 17, 20, 20H-320, 20P, 22, 24, 24W, 25, 26, 9, A-125, A-150, A-200, HW-20, HW-25, PTW-20, W-180, W-200, W-225 and W-250 torches.
What length and material is the hose?
The braided rubber hose measures 25 ft (7.6 m) and is designed for gas delivery to the torch.
How is the hose attached to the torch?
Push the hose onto the torch gas inlet until it seats fully; the step often missed is forgetting to secure the connection with the torch-specific clamp or ferrule.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
