Miller Enterprises
Miller Enterprises 30-150-320 Single Stage Gas Regulator CGA-320 0 to 150 psi
Single-stage regulator delivers 0 to 150 psi from CGA-320 cylinders with a 2.0 in gauge
- TypeTraffic & Parking Lot
- Single-stage design delivers consistent 0 to 150 psi outlet pressure
- CGA-320 inlet connects directly to CO₂ cylinders
- 0 in gauge shows supply pressure up to 4,000 psi
- Brass body with neoprene diaphragm resists corrosion
- UL Listed for general-purpose welding applications
Regulator for CO₂ cylinders
The Miller Enterprises 30-150-320 is a single-stage gas regulator designed for carbon dioxide service. It connects to a cylinder via a CGA-320 inlet and delivers pressure through a 5/8 in. -18 RH internal outlet. The brass body and neoprene diaphragm handle a maximum inlet pressure of 3,500 psi.
Steady delivery up to 150 psi
The unit provides a delivery range of 0 to 150 psi for general-purpose applications. A 2 in. gauge displays supply pressure up to 4,000 psi. The single-stage design reduces cylinder pressure in one step, while the Sure Seat filtered seat helps maintain consistent flow. The bright nickel-plated bonnet adds corrosion resistance.
CGA-320 inlet defines the gas service
The CGA-320 connection limits use to carbon dioxide cylinders only. Maximum inlet pressure is capped at 3,500 psi, so the regulator cannot be used with higher-pressure sources. The 5/8 in. -18 RH outlet fits compatible hoses and equipment. UL listing confirms compliance with applicable safety standards.
Highlights
- Single-stage design delivers consistent 0 to 150 psi outlet pressure
- CGA-320 inlet connects directly to CO₂ cylinders
- 0 in gauge shows supply pressure up to 4,000 psi
- Brass body with neoprene diaphragm resists corrosion
- UL Listed for general-purpose welding applications
Specifications
| Brand | MILLER ELECTRIC |
|---|---|
| Model | 30-150-320 |
| Type | Traffic & Parking Lot |
Questions about this item
Does the single-stage 0-150 psi regulator maintain steady flow without overheating during long welding sessions?
The brass body and neoprene diaphragm are designed for continuous general-purpose use at up to 150 psi delivery pressure.
Which cylinder fitting and outlet hose do I need to connect this CGA-320 regulator?
It requires a CGA-320 cylinder valve and accepts a 5/8 in.-18 RH internal outlet connection.
Will the 4,000 psi supply gauge read accurately on my older CO₂ cylinder rated for 3,500 psi max inlet?
The gauge reads up to 4,000 psi while the regulator's maximum inlet pressure is 3,500 psi, matching your cylinder rating.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
