Miles Lubricants
Miles Lubricants MSF1538005 Compressor Oil 1 gal Bottle SAE 20
SAE 20 compressor oil in a one-gallon bottle formulated with polyalkylene glycol base stock for rotary compressors
- Protects rotary compressors with ISO 68 viscosity
- Stable flow across temperatures with index 101
- High flash point of 460 degrees Fahrenheit
- Polyalkylene glycol base resists thermal breakdown
- One-gallon bottle supplies extended service intervals
Compressor Oil for Rotary Compressors
This Miles Lubricants fluid is formulated for rotary compressor lubrication. It uses a polyalkylene glycol base oil in the SXR Comp Coolant series. The product comes in a one-gallon bottle and is not food grade.
Viscosity Grades and Temperature Performance
The oil carries SAE 20 and ISO 68 viscosity grades with a viscosity index of 101. It measures 68 cSt at 40 degrees C and 9.1 cSt at 100 degrees C. The flash point is 460 degrees F.
Polyalkylene Glycol Base Oil Limitations
The PAG base stock is incompatible with mineral oils and requires a full system flush when converting. It is not suitable for breathing-air compressors or food-grade applications. Seal compatibility must be verified before use.
Highlights
- Protects rotary compressors with ISO 68 viscosity
- Stable flow across temperatures with index 101
- High flash point of 460 degrees Fahrenheit
- Polyalkylene glycol base resists thermal breakdown
- One-gallon bottle supplies extended service intervals
Specifications
| Brand | MILES LUBRICANTS |
|---|
Questions about this item
Will this SAE 20 compressor oil work in my older rotary compressor that currently runs on mineral oil?
The oil uses a polyalkylene glycol base and is formulated for rotary compressors; mixing it with mineral oil can reduce performance so a full drain and flush is recommended before switching.
How can I confirm the oil is performing correctly once the compressor is running?
Monitor discharge temperature and oil carry-over — stable temperatures near the 460 °F flash point and minimal carry-over indicate the ISO 68 viscosity and 101 viscosity index are working as intended.
Does the 1-gallon bottle include any additives or filters, or must I buy them separately?
The bottle contains only the compressor coolant; no additives, filters or other accessories are included and must be purchased separately if required.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
