Miles Lubricants
Miles Lubricants MSF1302007 16 oz Gear Oil 46 ISO Viscosity Yellow
Synthetic ISO VG 46 gear oil for hydraulic, turbine and circulation systems, rated from -15 °F to 215 °F with a viscosity index of 111 and 440 °F flash point
- ColorYellow
- Synthetic base oil resists breakdown at high temperatures
- ISO VG 46 viscosity matches hydraulic and turbine system requirements
- Operates from -15 °F to 215 °F for wide temperature range
- 440 °F flash point improves safety in hot environments
- Viscosity index 111 maintains consistent film strength across temperatures
16 oz ISO 46 Gear Oil
This synthetic lubricant carries an ISO viscosity grade of 46 and is packaged in a 16 oz bottle for hydraulic, turbine and circulation systems. The fluid is coloured yellow and contains no additives, making it suitable for maintenance teams that need a clean, single-grade oil. It is sold new and ready for immediate use in compatible equipment.
Thermals and power draw
The oil operates from a minimum of -15 degrees F up to a maximum of 215 degrees F, with a flash point of 440 degrees F and a viscosity index of 111. These figures indicate stable flow across a wide temperature range and resistance to thermal breakdown during normal circulation duty. No additives means no deposit formation that could alter heat transfer over time.
What the bundle changes
The product ships as a single 16 oz bottle with no additional accessories, dispensers or software included. Users must provide their own filling equipment and ensure system compatibility with an ISO 46 synthetic base oil. The container weighs 33 lb when full, so handling equipment may be required for bulk storage or transfer.
Highlights
- Synthetic base oil resists breakdown at high temperatures
- ISO VG 46 viscosity matches hydraulic and turbine system requirements
- Operates from -15 °F to 215 °F for wide temperature range
- 440 °F flash point improves safety in hot environments
- Viscosity index 111 maintains consistent film strength across temperatures
Specifications
| Brand | MILES LUBRICANTS |
|---|---|
| Color | Yellow |
Questions about this item
How do I add the 16 oz bottle of ISO 46 synthetic gear oil to a hydraulic system, and what step is often missed?
Fill to the manufacturer’s specified level, then run the system to purge air — skipping the bleed step leaves trapped air that causes erratic operation.
What maintenance will this synthetic gear oil need over time in a turbine or circulation system?
Monitor viscosity at the 215 °F max operating temperature; schedule oil analysis and change intervals based on contamination and oxidation trends.
What limit appears first when this oil runs continuously at high load in a hydraulic circuit?
The 215 °F maximum operating temperature is reached before the 440 °F flash point, so thermal capacity is the governing limit.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
