We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small white square Mikrotik access point with two Ethernet ports and microUSB power input

Mikrotik

Mikrotik mAP RBmAP2nD Dual-Chain 2.4GHz access point

SKU CH-VC79-VTAQH

A compact dual-chain 2.4 GHz access point with full RouterOS, powered via USB, passive PoE or jack, and supplying up to 500 mA PoE out from its second 10/100 Ethernet port

  • Full RouterOS control in a 68 × 68 × 19 mm device
  • Dual-chain 2.4 GHz radio for reliable wireless coverage
  • Power from USB, passive PoE or 24 V 0.8 A adapter
  • Second Ethernet port supplies up to 500 mA PoE to another device
  • 650 MHz CPU with 64 MB RAM drives routing and AP tasks

Portable dual-chain 2.4GHz access point

The Mikrotik mAP RBmAP2nD is a micro wireless access point with dual-chain 2.4GHz radio and full RouterOS capabilities. It suits mobile professionals, temporary deployments and compact network extensions where space and power flexibility matter. The unit fits in a pocket and runs from USB, passive PoE or the supplied 24V 0.8A adapter.

2.4GHz band and 10/100 Ethernet limits

The radio operates only on the 2.4GHz band with a built-in 1.2dBi antenna, so throughput and range are constrained by that spectrum and the low-gain antenna. Wired links are limited to 10/100 Mbit/s Ethernet on both ports, which caps backhaul speed and makes the device unsuitable for high-bandwidth uplinks or modern gigabit backbones.

Simple physical install, RouterOS learning curve

Mounting is trivial thanks to the 68x68x19mm body and multiple power options including the microUSB-to-USB adapter. The second Ethernet port can inject up to 500mA of passive PoE to power a downstream device such as a SXT CPE. Configuration requires RouterOS knowledge; users unfamiliar with its terminal or WinBox interface often misconfigure firewall, wireless or PoE-out settings on first setup.

Highlights

  • Full RouterOS control in a 68 × 68 × 19 mm device
  • Dual-chain 2.4 GHz radio for reliable wireless coverage
  • Power from USB, passive PoE or 24 V 0.8 A adapter
  • Second Ethernet port supplies up to 500 mA PoE to another device
  • 650 MHz CPU with 64 MB RAM drives routing and AP tasks

Specifications

BrandMikrotik
ModelmAP (RBmAP2nD)

Questions about this item

Should I choose the USB-powered version or the 24V adapter version for my mAP RBmAP2nD?

The unit accepts power from USB, passive PoE, or the included 24V 0.8A adapter; pick the source that matches your mounting location and cable reach.

What does the 1.2dBi antenna mean for real-world coverage?

The built-in 1.2dBi antenna gives modest gain suited for a single room or small office; expect usable signal across typical indoor distances.

How fast is the Ethernet link on the mAP RBmAP2nD?

Two 10/100 Mbit/s ports with Auto-MDI/X cap wired throughput at 100 Mbps, so the wireless link will not exceed that speed.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.