We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Mikrotik

Mikrotik hAP ac lite TC RB952Ui-5ac2nD-TC access point

SKU CH-JGMC-VD6FX

Dual-band access point with five 10/100 Ethernet ports, PoE output on port five, USB for 3G/4G modem and RouterOS L4 licence

  • Dual-band coverage on 2.4GHz and 5GHz simultaneously
  • 650MHz CPU with 64MB RAM handles routing tasks
  • Five 10/100Mbps Ethernet ports, PoE output on port five
  • USB port supports 3G/4G modem for backup connectivity
  • Compact case mounts horizontally, vertically or on a wall

Dual-Concurrent Wi-Fi Coverage

The Mikrotik hAP ac lite TC delivers simultaneous 2.4 GHz and 5 GHz wireless coverage for homes and small offices. A 650 MHz CPU with 64 MB RAM runs RouterOS L4, providing full routing, firewall and management features. Five 10/100 Mbps Ethernet ports include passive PoE output on port five for powering another device. A USB port accepts 3G or 4G modems for backup or primary WAN connectivity.

Sustained Load Behaviour

The 650 MHz processor and 64 MB RAM handle continuous routing, NAT and wireless traffic without thermal throttling in the fanless enclosure. Passive PoE output on Ether5 remains stable while the unit powers a downstream access point or IP camera. Dual-chain 2.4 GHz and single-chain 5 GHz radios maintain concurrent client associations during extended usage periods. The 16 MB onboard storage holds configuration backups and scripts for automated recovery.

Upgrade Path && Limitations

This unit replaces single-band routers or basic access points that lack concurrent dual-band operation or PoE output. The jump is worthwhile when you need RouterOS scripting, VLANs or a USB modem failover link in a compact desktop or wall-mounted form factor. It does not suit buyers who need Gigabit Ethernet ports, higher wireless throughput, or more RAM for large routing tables. Builders requiring SFP ports or active PoE standards should look elsewhere.

Highlights

  • Dual-band coverage on 2.4GHz and 5GHz simultaneously
  • 650MHz CPU with 64MB RAM handles routing tasks
  • Five 10/100Mbps Ethernet ports, PoE output on port five
  • USB port supports 3G/4G modem for backup connectivity
  • Compact case mounts horizontally, vertically or on a wall

Specifications

BrandMikrotik
ModelRB952Ui-5ac2nD-TC

Questions about this item

How much power does the 650MHz CPU draw when the access point runs continuously?

The unit uses passive PoE on Ether5 and five 10/100Mbps Ethernet ports; no CPU power-draw figure is published.

What must I already own to power the RB952Ui-5ac2nD-TC and use its USB port for a 3G/4G modem?

A passive PoE injector or switch for the Ether5 port and a compatible USB 3G/4G modem are required.

Will the single-chain 5GHz radio and 10/100Mbps ports bottleneck older 802.11n clients on my existing wired backbone?

The 5GHz radio is single-chain 802.11a/n/ac and all five Ethernet ports are 10/100Mbps, so throughput tops out at 100Mbps.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.