Mighty Line
Mighty Line 6RWCHVRED body repair tool 6 in 100 ft 50 mil
Vinyl floor marking tape with red and white stripes, 100 ft roll, 50 mil thick
- Width6"
- High-visibility red/white stripes boost floor safety
- Durable 50 mil vinyl resists heavy industrial traffic
- Continuous 100 ft roll covers long aisles without seams
- Six-inch width meets common aisle-marking standards
- Non-reflective surface reduces glare in bright work areas
Industrial Floor Marking Tape
Mighty Line 6RWCHVRED is a vinyl floor marking tape supplied in a continuous roll. It measures six inches wide and one hundred feet long with a fifty mil thickness. The tape features red and white stripes for high visibility in industrial settings. It is non-reflective and does not glow in the dark.
Suited For Aisle Marking And Hazard Zones
This tape suits facility managers marking aisles, traffic lanes or hazard boundaries on clean, dry floors. The vinyl construction resists typical warehouse pedestrian and light vehicle traffic. Buyers who need retroreflective properties for low-light areas should consider other options. Those requiring glow-in-the-dark egress marking will also need a different product.
Fifty Mil Thickness Determines Durability
The fifty mil thickness is the key specification that decides whether this tape fits the application. Thicker tapes withstand heavier wheel loads and more aggressive cleaning cycles. Thinner tapes may fail prematurely in high-traffic zones or under frequent pallet jack use. Match the thickness to the expected floor abuse before ordering.
Highlights
- High-visibility red/white stripes boost floor safety
- Durable 50 mil vinyl resists heavy industrial traffic
- Continuous 100 ft roll covers long aisles without seams
- Six-inch width meets common aisle-marking standards
- Non-reflective surface reduces glare in bright work areas
Specifications
| Brand | MIGHTY LINE |
|---|---|
| Width | 6" |
Questions about this item
Does the 50 mil vinyl tape generate heat or need power when applied continuously?
The tape is a passive vinyl floor marking material with no electrical components, so it produces no heat and requires no power during use.
What surface preparation or tools are required before installing the 6 inch wide roll?
A clean, dry floor and a hand roller or firm pressure are needed to bond the adhesive backing; no special equipment is required.
Will the red and white striped tape adhere reliably over existing painted lines or older floor markings?
The adhesive is designed for direct application to clean concrete or epoxy; loose or glossy old paint should be removed first for best adhesion.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



