MIDWEST FASTENER CORP
MIDWEST FASTENER CORP 53960 Blind Rivet Dome Head 5/32 in 3/8 in 18-8
A blind rivet with a dome head for one-sided fastening using a rivet tool
- TypeRivets
- 18-8 stainless resists corrosion for lasting outdoor use
- Dome head gives a finished look on visible surfaces
- Blind rivet installs from one side only
- 5/32 inch diameter fits standard hole sizes
- 3/8 inch grip range joins thin to medium panels
What this rivet is
MIDWEST FASTENER 53960 is a blind rivet with a dome head, also known as a pop rivet. It is supplied as a tubular fastener with a mandrel through the centre for single-sided installation. The rivet body is made from 18-8 stainless steel for corrosion resistance. This hardware suits automotive, fabrication and general repair tasks where only one side of the joint is accessible.
Who should use it and who should not
Builders needing a permanent mechanical joint from one side will find this rivet appropriate. It works where welding, bolts or screws cannot reach the blind face. Projects requiring a countersunk finish or a larger grip range should look at alternative fastener styles. Buyers who want a removable or reusable fixing should choose a different hardware type.
How it fits into a build
Drill a hole matching the rivet diameter through the materials to be joined, insert the assembly and pull the mandrel with a rivet tool. The mandrel expands the blind end and snaps off, leaving a flush dome head. The 18-8 stainless body resists rust in outdoor or marine environments. No threading, tapping or back-side access is required, freeing up design options for closed sections.
Highlights
- 18-8 stainless resists corrosion for lasting outdoor use
- Dome head gives a finished look on visible surfaces
- Blind rivet installs from one side only
- 5/32 inch diameter fits standard hole sizes
- 3/8 inch grip range joins thin to medium panels
Specifications
| Brand | MIDWEST FASTENER |
|---|---|
| Type | Rivets |
Questions about this item
What diameter drill bit is needed for the 5/32 in rivet?
Drill a 5/32 in hole through both pieces so the rivet body fits before setting.
Can these 18-8 stainless rivets contact aluminium without corrosion?
18-8 stainless is generally compatible with aluminium in dry conditions; isolate if moisture is present.
How do I confirm the mandrel snapped correctly after setting?
The mandrel breaks flush with the dome head and the rivet body stays tight in the hole.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
