MIDWEST FASTENER CORP
MIDWEST FASTENER CORP 53942 Blind Rivet Dome Head 1/4 in Dia 1/16 in L Aluminum hardware
Aluminium blind rivets with dome heads join materials from one side using a pop-rivet tool
- TypeRivets
- Blind installation works where only one side is accessible
- Dome head spreads load for a clean finished surface
- Aluminium body resists corrosion in outdoor and marine use
- 1/4 inch diameter suits standard hole sizes
- 1/16 inch length fits thin-sheet assemblies
Quarter-inch aluminum pop rivets
These 1/4 inch diameter aluminum blind rivets join sheet metal or plastic when you can reach only one side of the workpiece. The dome head leaves a smooth, finished surface after the mandrel snaps off. They suit automotive trim, HVAC ducting and general fabrication where a permanent, vibration-resistant fastener is required.
Check hole size and grip range
Verify that your drilled hole matches the 1/4 inch shank and that the total material thickness falls within the 1/16 inch grip length. A rivet tool capable of pulling 1/4 inch mandrels is also necessary. Orders below 75 dollars may incur a shipping charge from the manufacturer.
Mandrel included for single-tool installation
Each rivet ships with its mandrel pre-loaded, so the setting tool draws and snaps the stem in one stroke without separate consumables. The aluminum body resists corrosion in exterior or damp environments and requires no additional coatings or sealants for typical use.
Highlights
- Blind installation works where only one side is accessible
- Dome head spreads load for a clean finished surface
- Aluminium body resists corrosion in outdoor and marine use
- 1/4 inch diameter suits standard hole sizes
- 1/16 inch length fits thin-sheet assemblies
Specifications
| Brand | MIDWEST FASTENER |
|---|---|
| Type | Rivets |
Questions about this item
What comes in the box and do I need a separate tool?
The box contains the blind rivets; a pop-rivet tool is required to set them and is not included.
Which pack size should I choose for a small repair job?
The 16-count pack covers most small repairs without leaving many extras.
How does the 1/16 in grip length work when I install the rivet?
It joins materials totalling about 1/16 in thick; the mandrel pulls the blind end tight then snaps off.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
