We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black steel 19-inch 1U rack shelf 10-inch depth

MIDDLE ATLANTIC PRODUCTS

MIDDLE ATLANTIC PRODUCTS UTR1 19" 1U 10" depth 25 lb control sensor

SKU CH-PCB2-7A1VC MPN UTR1

A 19-inch, 1U steel rack shelf with 10-inch depth holds up to 25 pounds for mounting small components

  • Product nameHalf or Third-Space Rack Shelf
  • typeHome and Garden
  • featuresEIA/TIA compliant 19'' half / third rack shelf with 10" dept
  • Rack-mount small components in limited space with a 1U 19" shelf
  • Supports equipment up to 25 lbs using strong one-piece steel construction
  • Fits shallow cabinets with only 10" depth required for installation
  • Adds minimal height at just 1.7" tall for dense rack builds
  • Lifetime warranty backs the durable black steel shelf weighing 20 lb

19-inch 1U rack shelf

The UTR1 is a half or third-space rack shelf that fits a standard 19-inch enclosure and occupies 1U of vertical space. It is built from one-piece steel and finished in black for equipment racks in home or commercial installations.

Tool-free placement

The shelf rests on the rack rails and requires no screws or brackets to sit in place. Two hook-and-loop strips measuring 2 by 10 inches are included to secure lightweight components and prevent them from sliding during vibration or movement.

25 lb capacity with 10-inch depth

The 10-inch deep surface supports devices up to 25 pounds such as small network switches, audio processors or power strips. Heavier chassis or deeper appliances will exceed the rated limit and need a full-depth shelf instead.

Highlights

  • Rack-mount small components in limited space with a 1U 19" shelf
  • Supports equipment up to 25 lbs using strong one-piece steel construction
  • Fits shallow cabinets with only 10" depth required for installation
  • Adds minimal height at just 1.7" tall for dense rack builds
  • Lifetime warranty backs the durable black steel shelf weighing 20 lb

Specifications

BrandMiddle Atlantic
ModelUTR1
Product nameHalf or Third-Space Rack Shelf
typeHome and Garden
featuresEIA/TIA compliant 19'' half / third rack shelf with 10" depth shall be Middle Atlantic Products model # UTR1. Weight capacity shall be 25 lbs. UTR1 shall include two 2'' x 10'' hook & loop strips for component mounting and a generous vent pattern for superior air circulation.Contractor packs shall be available with twelve UTR1 rackshelves and shall be model # UTR1-RP12.

Questions about this item

How can I confirm the shelf is seated correctly after mounting it in my 19" rack?

The shelf fits a standard 19" EIA/TIA rack opening and occupies 1U of vertical space. Once the four mounting screws are tight, the front flange should sit flush with the rack rails and the 10" deep steel deck should be level.

What hardware is included and what must I supply myself?

The box contains the one-piece steel shelf and two 2" x 10" hook-and-loop strips for securing components. You must provide the four rack-mount screws or cage nuts that match your rack's thread type.

The spec sheet lists a 25 lb capacity and a 20 lb shelf weight — which figure should I use when planning my rack load?

Use the 25 lb weight capacity for the equipment you place on the shelf. The 20 lb figure is the shelf's own weight, which counts toward the rack's total load limit but not toward the shelf's rating.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.