Micro Connectors
Micro Connectors CAT 6A F/UTP CMR 1000 ft Blue 23 AWG 750 MHz
1000 ft Cat 6A shielded bulk cable with 23 AWG solid copper, foil shielding, CMR riser jacket and 750 MHz bandwidth for PoE++ runs
- Length1000 ft.
- ColorBlue
- F/UTP foil shielding blocks EMI in walls
- CMR riser rating approved for vertical runs
- 23 AWG solid copper carries PoE++ power
- 750 MHz bandwidth supports 10 GbE links
- 1000 ft wooden spool simplifies large pulls
Solid shielded cable for structured wiring
This 1000 ft bulk CAT6A cable uses 23 AWG solid copper conductors with overall aluminum foil shielding (F/UTP). The CMR riser-rated jacket permits vertical in-wall runs between floors. A cross separator spline reduces crosstalk across the four twisted pairs. Supplied on a wooden spool with running-footage markings for measured pulls.
Installers needing PoE++ headroom and EMI protection
Suits commercial drops, campus backbones and ceiling spaces where fluorescent ballasts or power cables run nearby. Handles PoE, PoE+ and PoE++ loads on all four pairs. Not suited for patch-cord assemblies that require stranded conductors or for outdoor burial without additional ducting.
750 MHz bandwidth ceiling for 10GBASE-T
The cable is qualified to 750 MHz, the frequency headroom that determines whether a 100 m channel can sustain 10 Gb/s Ethernet. If your design targets only 1 Gb/s, a lower-category cable will cost less; if you need certified 10GBASE-T performance over the full 100 m, this specification is the deciding factor.
Highlights
- F/UTP foil shielding blocks EMI in walls
- CMR riser rating approved for vertical runs
- 23 AWG solid copper carries PoE++ power
- 750 MHz bandwidth supports 10 GbE links
- 1000 ft wooden spool simplifies large pulls
Specifications
| Length | 1000 ft. |
|---|---|
| Color | Blue |
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



