Micro 100
Micro 100 RC-375040 brazed tool bit RC 6 in 3/8 in
Carbide-tipped brazed tool bit for right-hand turning operations with a 3/8 inch shank width
- MaterialHAWA
- Weight0.25
- Carbide tip keeps a sharp edge longer
- HAWA material resists wear in tough cuts
- Right-hand design feeds smoothly on lathes
- 3/8 in shank fits standard tool holders
- Light .25 lb weight reduces operator fatigue
Single-Point Tool Bit RC
This Micro 100 brazed tool bit uses HAWA carbide material with a zinc coating for right-hand cutting operations. The RC designation indicates its specific geometry for turning applications. It arrives new and ready for use in compatible tool holders.
Check Shank Width and Tool Holder
Verify your tool holder accepts a 3/8 in shank width before ordering. The overall length is 6 in, so confirm your machine provides adequate clearance. Ensure the right-hand orientation matches your cutting direction requirements.
Suits Lathe Operators Using Carbide Tooling
Machinists running manual or CNC lathes with standard tool holders will find this bit suitable for general turning. Builders needing left-hand cutting geometry or a different shank size should look at alternative tool bits. Those requiring indexable inserts rather than brazed tips will need a different system.
Highlights
- Carbide tip keeps a sharp edge longer
- HAWA material resists wear in tough cuts
- Right-hand design feeds smoothly on lathes
- 3/8 in shank fits standard tool holders
- Light .25 lb weight reduces operator fatigue
Specifications
| Brand | Micro 100 |
|---|---|
| Material | HAWA |
| Weight | 0.25 |
Questions about this item
What comes in the package and is anything else needed to use the Micro 100 RC-375040 brazed tool bit?
The package contains the single-point carbide tool bit with a 3/8 in. shank width. No additional components are required for installation in a compatible tool holder.
How do I choose between the available versions or capacities of the Micro 100 RC-375040?
This item is offered as a single configuration: right-hand, carbide, zinc, 6 in. length, 3/8 in. shank width. There are no alternative versions or capacities to select from.
What does the 6 in. overall length mean when the bit is mounted in a lathe or tool post?
The 6 in. length provides extended reach for deeper cuts while the 3/8 in. shank fits standard holders. The HAWA carbide material maintains edge hardness during turning operations.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
