Miady FCA6ABe84 Power Extension Cord 10 Pack 16AWG 13A 125V 8 Inch Black
An eight-inch cord with NEMA 5-15 connectors extends bulky plugs so they no longer block adjacent outlets on strips or walls
- FeaturesThis 10-Pack (Non-Lighted) power extension cord is made by M
- Maximise outlet space with 10 short cords
- ETL and cETL listed for safe 13 A use
- 16 AWG pure copper handles 1625 W reliably
- 8 inch length keeps power strips tidy
- Molded stress relief resists moisture and abrasion
Outlet-Saving Power Extension Pack
This ten-pack of eight-inch extension cords adds extra reach between bulky AC adapters and crowded power strips or wall outlets. Each cord uses a straight-blade NEMA 5-15P plug and matching NEMA 5-15R receptacle so standard three-prong devices connect without blocking adjacent sockets. The short length keeps cable clutter to a minimum in tight spaces behind desks or entertainment units. Designed for indoor use with common household electronics and office equipment.
13 A 125 V Rating on 16 AWG SJT Cable
The single specification that decides fit is the 13-amp, 125-volt rating carried by 16 AWG SJT conductors, delivering up to 1625 watts per cord. Pure copper wire with PVC insulation and a PVC outer jacket meets ETL and cETL listings for safety compliance. Exceeding this current or voltage rating risks overheating, so the cords suit typical laptop chargers, monitors and peripherals but not high-draw appliances such as heaters or large power tools.
Plug-and-Play Install with Molded Stress Relief
Installation is a simple push of the male plug into the outlet and the device plug into the female end; no tools or wiring are required. Molded-in strain relief and easy-grip connector bodies reduce the chance of loose connections or cable fatigue at the junction points. The most common issue arises when users daisy-chain multiple cords or plug in loads above 13 amps, which can defeat the outlet-saving purpose and create a fire hazard.
Highlights
- Maximise outlet space with 10 short cords
- ETL and cETL listed for safe 13 A use
- 16 AWG pure copper handles 1625 W reliably
- 8 inch length keeps power strips tidy
- Molded stress relief resists moisture and abrasion
Specifications
| Brand | Miady |
|---|---|
| Model | FCA6ABe84 |
| Features | This 10-Pack (Non-Lighted) power extension cord is made by Miady and features a Straight Blade Plug style with vinyl material. It supports a voltage of 125 volts and an input current of 13 amps. The cable is Black in color and is UL listed. It comes with a Male-to-Female connector and does not require batteries. |
Questions about this item
How much power can each 8‑inch cord handle when plugged into a standard outlet?
Each cord is rated for 13 amps at 125 volts, delivering up to 1625 watts through its 16 AWG conductors.
What connectors are used and what standard do they follow?
Both ends use NEMA 5‑15P plug and NEMA 5‑15R receptacle, the standard North American 15‑amp grounding interface.
What physical space does one cord occupy on a power strip?
The cord measures 8 inches end‑to‑end with a straight‑blade plug and molded strain relief, designed to sit flat beside bulky adapters.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



