Mi-T-M
Mi-T-M 18-0407 Pressure Washer Nozzle 15° 5 mm 4000 psi Quick-Connect
A 15-degree fan-pattern nozzle with a 5 mm orifice rated for 4,000 psi and quick-connect fitting
- 15-degree fan pattern targets grime precisely
- 5 mm orifice delivers 5 GPM flow
- Quick-release fitting snaps on in seconds
- Rated to 4000 psi for tough jobs
- Plastic and stainless steel resists 225°F heat
Nozzle for Mi-T-M pressure washers
This 15-degree fan nozzle is built for Mi-T-M pressure washers that accept a 1/4-inch quick-release fitting. It delivers a focused spray pattern suited to surface preparation and heavy-duty cleaning tasks. The stainless-steel orifice and plastic housing withstand fluid temperatures up to 225 degrees Fahrenheit. Contractors and maintenance crews use it where a narrow, high-impact jet is required.
Sustained pressure and flow performance
Rated for continuous operation at 4,000 psi, the nozzle maintains its 15-degree fan pattern and 5 gallons-per-minute flow without deformation of the 5 mm orifice. The stainless-steel insert resists erosion that would widen the spray angle under prolonged high-pressure use. Plastic body components remain stable at the maximum rated temperature. The quick-release connection stays sealed during extended trigger time.
Quick-connect interface limits
The 1/4-inch quick-release fitting locks onto compatible Mi-T-M lances but will not mate with larger or threaded inlets. Maximum working pressure is capped at 4,000 psi and fluid temperature at 225 degrees Fahrenheit; exceeding either limit risks fitting failure or material damage. Flow is restricted to 5 gallons per minute by the 5 mm orifice size. Users needing wider coverage or higher flow must select a different nozzle.
Highlights
- 15-degree fan pattern targets grime precisely
- 5 mm orifice delivers 5 GPM flow
- Quick-release fitting snaps on in seconds
- Rated to 4000 psi for tough jobs
- Plastic and stainless steel resists 225°F heat
Specifications
| Brand | MI-T-M |
|---|
Questions about this item
Does the 15-degree spray pattern and 4000 psi rating generate noticeable vibration or heat during extended cleaning jobs?
The nozzle itself has no moving parts or motor, so it produces no vibration or heat; any noise or warmth comes from the pressure washer pump supplying up to 4000 psi at 5 gallons per minute.
What pressure washer fittings must I already have to attach this 1/4-inch quick-connect nozzle?
You need a pressure washer gun or lance with a standard 1/4-inch quick-release socket that accepts the nozzle’s quick-connect plug.
Will this 5 mm nozzle work on an older Mi-T-M unit that originally used a different orifice size?
Yes, as long as the older Mi-T-M machine has a 1/4-inch quick-connect fitting and operates within the 4000 psi and 225 Degrees F limits, the 5 mm nozzle will connect and function.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
