Mi-T-M
Mi-T-M 18-0396 Pressure Washer Nozzle 3.5 mm 40° Fan
A 40-degree fan nozzle with a 3.5 mm orifice handles up to 4,000 psi and 3.5 gpm on compatible Mi-T-M pressure washers
- Wide 40° fan spray covers large areas
- 5 mm orifice delivers up to 3.5 gpm flow
- Rated for 4,000 psi operating pressure
- Withstands fluid temperatures up to 225°F
- Quick-release 1/4 inch inlet for fast changes
Mi-T-M 18-0396 Nozzle for Pressure Washers
The Mi-T-M 18-0396 is a replacement spray nozzle built for Mi-T-M pressure washers. It fits models GC-5004-1MGH and GC-5004-3MAH and connects through a 1/4 inch quick-release inlet. The nozzle produces a 40-degree fan pattern from a 3.5 mm orifice. It is rated for 4000 psi and flow up to 3.5 gpm.
Fan Pattern and Quick-Release Fitting
The 40-degree fan spray covers a wider surface than a narrow jet, which helps when washing vehicles, siding or flatwork. A quick-release fitting lets operators swap nozzles without tools, reducing downtime between tasks. The white plastic and stainless-steel body resists corrosion from detergents and hot water up to 225 degrees Fahrenheit.
Pressure and Temperature Limits
The nozzle is rated to 4000 psi, so it must not be used on machines that exceed that pressure. Fluid temperature must stay at or below 225 degrees Fahrenheit to avoid material damage. The 3.5 mm orifice limits flow to 3.5 gpm; pumps delivering higher volume will not increase output through this tip. Buyers needing a narrower spray angle or a different orifice size must select another nozzle.
Highlights
- Wide 40° fan spray covers large areas
- 5 mm orifice delivers up to 3.5 gpm flow
- Rated for 4,000 psi operating pressure
- Withstands fluid temperatures up to 225°F
- Quick-release 1/4 inch inlet for fast changes
Specifications
| Brand | MI-T-M |
|---|
Questions about this item
How often should the plastic and stainless-steel nozzle be inspected or replaced under heavy use?
Inspect the 3.5 mm orifice regularly for wear; replace the nozzle if the 40-degree fan pattern degrades or flow drops below the rated 3.5 gpm.
What is the first performance limit reached during continuous high-pressure washing?
The 4,000 psi operating-pressure ceiling is the primary limit; sustained pressure above this rating risks nozzle damage.
How hot does the nozzle get when running all day at 4,000 psi?
The nozzle is rated for fluid temperatures up to 225 degrees Fahrenheit; surface heat stays within that limit during extended operation.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
