We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Gray painted dash kit for Ford Transit 2015-up with double DIN opening and pocket

METRA

METRA 995835G Double DIN Dash Kit Ford Transit 2015-up

SKU CH-T7D2-9WNX8

Dash kit with ISO DIN and double-DIN provisions, painted gray trim, and included pocket, brackets, airbag light, and hardware for Ford Transit 2015-up without navigation

  • FeaturesSingle/Double DIN Install Dash Kit
  • FeatureSingle/Double DIN Install Dash Kit
  • Weight3.00
  • Double DIN radio provision for modern head unit upgrades
  • ISO DIN pocket adds convenient storage below the radio
  • Gray-painted trim panel matches Ford Transit interior finish
  • Includes passenger airbag light and blank for correct dash integration
  • Complete hardware kit with brackets, clips and screws supplied

Vehicle-specific dash kit

The Metra 995835G kit enables installation of an ISO single-DIN or double-DIN head unit into a Ford Transit from 2015 onward without factory navigation. A painted grey trim panel matches the dashboard finish and includes a pocket for single-DIN fitments. The package supplies all required brackets and a passenger airbag indicator light plus a blank for vehicles without that feature.

Complete hardware bundle

Brackets, pocket, airbag light and blank, plus four sizes of metal and plastic panel clips are included so the installer can secure the new radio and restore the factory safety indicator. Four #8 truss-head and two #8 pan-head Phillips screws are also provided for the radio brackets and trim panel. No separate fastener kit is required.

Pre-installation checks

Verify the Transit is a 2015 or newer model without the factory navigation system. Ensure all accessories, switches, climate controls and especially the passenger airbag indicator are reconnected before cycling the ignition. Do not remove the original radio with the key in the on position or while the engine is running.

Highlights

  • Double DIN radio provision for modern head unit upgrades
  • ISO DIN pocket adds convenient storage below the radio
  • Gray-painted trim panel matches Ford Transit interior finish
  • Includes passenger airbag light and blank for correct dash integration
  • Complete hardware kit with brackets, clips and screws supplied

Specifications

BrandMetra
FeaturesSingle/Double DIN Install Dash Kit
FeatureSingle/Double DIN Install Dash Kit
Weight3.00

Questions about this item

Will the passenger airbag indicator light need to be reconnected or replaced during installation?

The kit includes both a passenger airbag light and a blank cover; the original indicator must be reconnected before the ignition is cycled to avoid warning lights.

What is the first fitment limit encountered when installing a double-DIN head unit in a 2015-up Ford Transit without navigation?

The dash panel and radio brackets are shaped for the non-navigation factory dashboard, so a navigation-equipped dash would prevent correct alignment.

Does the painted gray trim panel warp or discolour after long exposure to cabin heat?

The trim panel is painted gray plastic designed for automotive interior temperatures; no heat-related deformation is specified for this kit.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.