Mesee MESE23-0017GY 6-Piece Titanium Coated HSS Drill & Saw Bit Set 3.0-8.0mm
Six-piece titanium-coated HSS drill and saw bit set covers 3.0 mm to 8.0 mm diameters for wood, plastic and thin metal
- TypeDrill Bits
- MaterialSteel
- Selling UnitSet
- FeaturesTile, Wood
- Item Count6, 6-Piece Set
- Six cutting diameters from 3.0 to 8.0 mm cover diverse tasks
- Titanium coated HSS reaches 60-63 HRC for wear and heat resistance
- 135-degree split point prevents walking and centres holes accurately
- Spiral groove and sharp serrations clear chips for smooth continuous drilling
- Straight shank fits electric and bench drills for wood metal plastic
6-Piece Titanium Coated HSS Drill & Saw Bit Set
This set contains six high-speed steel bits with a titanium coating rated to 60-63HRC hardness. Sizes range from 3.0mm to 8.0mm in cutting diameter, covering 3.0, 4.0, 5.0, 6.0, 6.5 and 8.0mm. The straight round shank fits most electric and bench drills for quick, secure fastening. It is suited to DIY woodworking, home maintenance and general repair tasks on wood, plastic and thin metal.
Thermals noise and power draw in normal use
The titanium coating and fully ground spiral grooves reduce friction and heat during operation. Sharp serrations and the groove design provide efficient chip evacuation to prevent clogging on continuous horizontal cuts. A 135-degree split point ensures accurate hole positioning without a centre punch, keeping drilling precise and fast. Power draw and noise depend entirely on the drill used.
Upgrade from standard twist bits
These bits combine drilling, routing, filing and sawing in one tool for thin wood, solid wood, MDF, multilayer board, plastic, aluminium and thin iron sheet up to 1-2mm thick. The jump is worth it when you need clean grooves and holes in mixed materials without changing accessories. They do not suit thick steel, masonry or deep cutting beyond the stated material thickness.
Highlights
- Six cutting diameters from 3.0 to 8.0 mm cover diverse tasks
- Titanium coated HSS reaches 60-63 HRC for wear and heat resistance
- 135-degree split point prevents walking and centres holes accurately
- Spiral groove and sharp serrations clear chips for smooth continuous drilling
- Straight shank fits electric and bench drills for wood metal plastic
Specifications
| Brand | Mesee |
|---|---|
| Type | Drill Bits |
| Material | Steel |
| Selling Unit | Set |
| Features | Tile, Wood |
| Item Count | 6, 6-Piece Set |
| Part Number | MESE23-0017GY |
Questions about this item
How do I install the straight-shank bits in my electric drill without them slipping?
Insert the straight round shank fully into the drill chuck and tighten all three jaws evenly; the straight shank design fits most electric and bench drills and resists slipping when clamped properly.
When will the titanium coating on these HSS bits wear off and need replacement?
The titanium coating on the high-speed steel increases wear and rust resistance; replace individual bits when the cutting edges dull or the coating visibly wears, reducing cutting performance in wood, plastic or thin metal.
What is the maximum material thickness these 3.0 mm to 8.0 mm bits can cut in a single pass?
The set is designed for pulling grooves, boring or cutting 1 mm to 2 mm thick material such as thin wood, solid wood, multilayer board, MDF, plastic board, thin iron sheet and aluminum alloy.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
