We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small rectangular ARGB splitter hub with ten 3-pin ports and a SATA power cable

MEIRIYFA 409 5V 3PIN ARGB Splitter Hub 10 Port SATA 50cm

SKU CH-PWJ4-BFAD7

A 5V 3-pin ARGB splitter hub expands one header to ten ports with SATA power and a 50 cm cable

  • Changer TypeClassic
  • SpecificationsClassic, MEIRIYFA, 409, Personal Computer, 0.041 kilograms,
  • Sports Team1 Piece
  • FeaturesClassic
  • Expands one 5V ARGB header into ten ports
  • SATA power input prevents voltage drop under full load
  • 50 cm cable reaches across full-tower chassis
  • 3M adhesive backing secures hub without screws
  • Works only with 5V 3-pin ARGB devices

5V 3-Pin ARGB Splitter Hub

The MEIRIYFA 409 hub expands a single 5V addressable ARGB header into ten ports for connecting multiple fans or LED strips. It draws power directly from a SATA connector on the power supply to prevent voltage drop across all connected devices. The unit fixes inside the chassis using an adhesive backing for a secure, space-saving installation.

Sustained Load Stability

A dedicated SATA power input feeds the hub independently of the motherboard header, maintaining consistent voltage when all ten ports are populated. This architecture avoids the current limitations of a single 5V header, so lighting effects remain stable during extended operation. The design ensures each connected device receives adequate power without overloading the mainboard circuit.

5V ARGB Interface Limits

The hub accepts only 5V 3-pin addressable ARGB connectors and must not be attached to 12V RGB headers. The included cable runs approximately 50 centimetres from the motherboard to the hub, defining the maximum placement distance inside the case. Builders needing 12V analogue RGB control or longer cable runs cannot use this unit.

Highlights

  • Expands one 5V ARGB header into ten ports
  • SATA power input prevents voltage drop under full load
  • 50 cm cable reaches across full-tower chassis
  • 3M adhesive backing secures hub without screws
  • Works only with 5V 3-pin ARGB devices

Specifications

BrandMEIRIYFA, shenzhen milidianzi
Model409
Part Number409
Changer TypeClassic
SpecificationsClassic, MEIRIYFA, 409, Personal Computer, 0.041 kilograms, 1.6002 L x 11.6078 W x 18.6944 H centimeters, no
Sports Team1 Piece
FeaturesClassic

Questions about this item

Does the SATA-powered hub add noticeable heat or fan noise when running ten devices all day?

The hub itself has no moving parts and draws power through the SATA connector, so it produces no audible noise and negligible heat during continuous operation.

What connector on my power supply is required to run the 10-port ARGB splitter?

A standard SATA power connector from the PSU is needed; the hub does not draw power from the motherboard header.

Can I keep my older 12 V RGB strips and plug them into the 5 V 3-pin ports on this hub?

No, the hub only accepts 5 V addressable ARGB devices; connecting 12 V components can cause damage.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.