We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Megger 1006-600 micro-ohm meter, digital display, 4.5 in screen, IP54 IP65, includes handspikes and charger

Megger

Megger 1006-600 Micro Ohm Meter 1.9999m Ohms-1999.9 Ohms measurement tool

SKU CH-VKD6-SXY9J

Measures resistance from 1.999 microhm to 1999.9 ohm with 0.1 microhm resolution and 10 A test current

  • TypeElectronic
  • Micro-ohm resolution down to 0.1 µΩ for precise low-resistance testing
  • Measurement range spans 1.9999 mΩ to 1999.9 Ω covering diverse applications
  • 10 A test current ensures accurate readings on inductive or resistive loads
  • Dual IP54 and IP65 ratings protect against dust and water ingress
  • RS-232 interface and 4.5 in display enable data logging and clear readouts

Micro-Ohmmeter for Precision Low-Resistance Testing

The Megger 1006-600 is a new micro-ohmmeter designed for technicians who need accurate low-resistance measurements. It covers a range from 1.9999m Ohms to 1999.9 Ohms with a resolution down to 0.1 microohm. The four-digit digital display and 10A test current suit maintenance, commissioning and quality-control tasks where contact or bond integrity must be verified.

Handspike Connection and Environmental Sealing

The kit includes two DH4-C duplex handspikes that plug directly into the instrument for four-wire Kelvin measurements. A battery charger and cigar-lighter adapter keep the unit powered in the workshop or vehicle. The enclosure carries IP54 and IP65 ratings, so dust and water jets will not interrupt a test. The main installation step is securing clean, firm contact on the test points; loose or oxidised connections are the usual cause of noisy readings.

RS-232 Data Transfer and Resistance Ceiling

Measurement data leaves the meter through an RS-232 port for logging or reporting on a connected device. The upper measurement limit is 2 kiloohm, so circuits or components exceeding that value cannot be characterised with this unit. The 4.5-inch display shows four digits, which fixes the resolution at each range. Users needing higher resistance ranges or wireless logging should select a different instrument.

Highlights

  • Micro-ohm resolution down to 0.1 µΩ for precise low-resistance testing
  • Measurement range spans 1.9999 mΩ to 1999.9 Ω covering diverse applications
  • 10 A test current ensures accurate readings on inductive or resistive loads
  • Dual IP54 and IP65 ratings protect against dust and water ingress
  • RS-232 interface and 4.5 in display enable data logging and clear readouts

Specifications

BrandMEGGER
TypeElectronic

Questions about this item

How do I verify the meter is reading correctly after connecting the handspikes?

Apply the 10 A test current to a known low-resistance shunt; the 4.5 in digital display should show a stable value within the 1.9999 mΩ to 1999.9 Ω range with 0.1 µΩ resolution.

Which accessories are included and what must I source separately?

The box contains two DH4-C duplex handspikes, a battery charger and a cigar-lighter adapter; only replacement batteries or test leads for other current ratings would be extra purchases.

Should I choose the IP54 or IP65 version for workshop use?

The single unit meets both IP54 and IP65 ratings, so it resists dust and water jets without needing a separate model selection.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.