We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Charcoal 7-foot keel protector strip, flexible polymer with angled grooves

Megaware KeelGuard

Megaware KeelGuard Keel Protector 7 ft Charcoal

SKU CH-ZHB5-JDHAW

A 7-foot abrasion-resistant keel protector that shields gelcoat from sand, rocks and ramps, available in 11 colours

  • Protects keel from sand, rocks and ramps with abrasion-resistant polymer blend
  • Pressure-sensitive adhesive permanently bonds contoured edges to hull surface
  • Angled grooves create hydrodynamic channels and air pockets for slicker surface
  • DIY installation designed with boat designers and 3M engineers
  • Available in 11 colours to match virtually any boat

Keel protector for DIY boat owners

The Megaware KeelGuard is a self-adhesive strip designed to shield a boat’s keel from abrasion caused by sand, rocks and ramp contact. It helps preserve the gelcoat finish and prevents water intrusion that can damage fiberglass laminates. The product is intended for owners who want a straightforward do-it-yourself installation to extend the service life of their hull.

Abrasion-resistant polymer blend

A precise blend of polymers and urethanes gives the protector durability and pliability for normal marine exposure. Angled grooves create hydrodynamic channels that form air pockets, reducing drag and providing a slicker running surface. The pressure-sensitive adhesive permanently bonds and seals the contoured edges to the hull without requiring additional fasteners.

Long-term adhesion and UV stability under

The adhesive system is engineered to maintain a permanent bond while the contoured edges stay sealed during sustained contact with water. UV-resistant pigments in the Charcoal finish and the other ten colours resist fading and material breakdown over extended seasons. The hydrodynamic channels continue to manage water flow and reduce wear throughout the protector’s service life.

Highlights

  • Protects keel from sand, rocks and ramps with abrasion-resistant polymer blend
  • Pressure-sensitive adhesive permanently bonds contoured edges to hull surface
  • Angled grooves create hydrodynamic channels and air pockets for slicker surface
  • DIY installation designed with boat designers and 3M engineers
  • Available in 11 colours to match virtually any boat

Specifications

BrandMEGAWARE KEELGUARD

Questions about this item

How do I install the KeelGuard and what step causes the most problems?

Clean the hull thoroughly with acetone, dry it completely, then apply firm even pressure along the full 7 ft length; the step most often missed is skipping the acetone wipe, which prevents the pressure-sensitive adhesive from bonding permanently.

What maintenance or replacement will this protector need later?

The polymer-urethane blend resists UV and abrasion, so no routine maintenance is required; replacement is only necessary if a severe impact cuts through the contoured edges or lifts the adhesive bond.

What limit appears first under sustained use on sand, rocks and ramps?

The adhesive bond is the first limit; if the edges lift, water can reach the gelcoat, so inspect the contoured edges periodically and press them back down if any corner begins to peel.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.