Megamounts
Megamounts GMW686 Full Motion TV Mount 37-60" 16.25" Extension
Full-motion wall bracket holds 37–60 in screens up to 99 lbs with 16.25 in extension, 180° swivel and downward tilt
- NameFull Motion Articulated Tilt and Swivel Television Mount
- FeatureFull Motion Articulated Tilt and Swivel Television Mount
- Full motion articulation enables flexible viewing angles
- Extends 16.25 inches from wall for easy access
- Supports 37 to 60 inch screens up to 99 lbs
- 180 degree swivel allows side-to-side adjustment
- Built-in bubble level simplifies straight installation
Screen Compatibility and Load
The GMW686 fits flat screens from 37 to 60 inches and supports displays weighing up to 99 lbs. It is designed for living rooms, bedrooms or offices where a single large panel needs secure mounting. Buyers with screens larger than 60 inches or heavier than 99 lbs will need a different bracket.
Movement Range
Full motion articulation provides up to 16.25 inches of extension from the wall and 180 degrees of swivel. Downward tilt is also available for glare reduction. No motorised movement or preset positions are included.
Mounting Hardware and Leveling
A bubble level is integrated to help achieve a straight installation on wood studs or concrete. The package includes the necessary lag bolts and anchors for those surfaces. Installers without stud-finding tools or masonry bits should acquire them separately.
Highlights
- Full motion articulation enables flexible viewing angles
- Extends 16.25 inches from wall for easy access
- Supports 37 to 60 inch screens up to 99 lbs
- 180 degree swivel allows side-to-side adjustment
- Built-in bubble level simplifies straight installation
Specifications
| Brand | Megamounts |
|---|---|
| Model | GMW686 |
| Name | Full Motion Articulated Tilt and Swivel Television Mount |
| Feature | Full Motion Articulated Tilt and Swivel Television Mount |
| Shipping weight | 5.44 kg |
| Package size | 686 × 203 × 76 mm |
Questions about this item
How do I mount the GMW686 to the wall studs and what step is most often missed?
Secure the wall plate to two studs using the included lag bolts; the step most often missed is confirming the plate is perfectly level with the built-in bubble level before drilling the second bolt.
Which parts of the GMW686 might need tightening or replacement after extended use?
The pivot bolts at the two arm joints and the swivel base can loosen over time; check them every few months and tighten with a hex key if the screen drifts.
At what point does the 16.25-inch extension reach its limit during daily pull-out and push-back cycles?
The articulated arms stop at the full 16.25-inch extension; forcing the screen beyond that hard stop will strain the joints and can bend the mounting rails.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



