We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Bright brass single-cylinder deadbolt with tapered cylinder housing and rectangular faceplate

Medeco

Medeco 11-R504-605-00 Bright Brass Grade 1 Single Cylinder Deadbolt 2-3/4" Backset 1" Faceplate door lock

SKU CH-N5BX-279TC MPN 11-R504-605-00

Grade 1 single-cylinder deadbolt with 5-pin tumbler, anti-drill and anti-pry protection, fitting doors 1-3/8" to 2-1/2" thick

  • FinishBright Brass
  • Selling UnitBox
  • Grade 1 certification resists forced entry
  • ANSI/BHMA 156.30 and UL 437 listed cylinders
  • 5-pin tumbler with Original 00 keyway prevents picking
  • Solid brass construction resists drilling and prying
  • Fits doors 1-3/8 to 2-1/2 inches thick

Medeco Grade 1 Single Cylinder Deadbolt

The Medeco 11-R504-605-00 is a Grade 1 single cylinder tubular deadbolt finished in bright brass. It uses a 5-pin tumbler cylinder with the Original 00 keyway to deliver triple locking security against picking and unauthorised key duplication. Solid brass construction adds anti-drilling and anti-prying resistance for commercial and heavy-duty residential doors.

Sustained Physical Attack Resistance

ANSI/BHMA A156.30 and UL 437 listed cylinders maintain their protective performance during prolonged attack attempts. The solid brass body and hardened internal components resist drilling, prying and forced entry without degradation over time. This deadbolt is built for apartments, retail outlets and multi-family units where consistent high security is required daily.

Door Preparation Checklist

Verify the door thickness falls between 1-3/8" and 2-1/2" before ordering. Confirm the existing crossbore measures 2-1/8" and the edge bore is 1" to match the deadbolt dimensions. Ensure the backset is 2-3/4" and the faceplate width is 1" for correct alignment and installation.

Highlights

  • Grade 1 certification resists forced entry
  • ANSI/BHMA 156.30 and UL 437 listed cylinders
  • 5-pin tumbler with Original 00 keyway prevents picking
  • Solid brass construction resists drilling and prying
  • Fits doors 1-3/8 to 2-1/2 inches thick

Specifications

BrandMedeco
Model11-R504-605-00
FinishBright Brass
Selling UnitBox

Questions about this item

Does the Medeco 11-R504-605-00 deadbolt generate any noise or heat during continuous daily operation?

No, the mechanical single-cylinder deadbolt has no motor or electronics, so it produces no audible noise and no heat when locked or unlocked repeatedly throughout the day.

What door preparation must already exist for the 2-3/4" backset and 1" faceplate to install correctly?

The door needs a 2-1/8" crossbore, a 1" edge bore, and a thickness between 1-3/8" and 2-1/2" to match the factory specifications.

Will the Original 00 keyway work with the Medeco keys I already use on other locks in the building?

Yes, if your existing Medeco cylinders are also cut to the Original 00 keyway, the same keys will operate this Grade 1 deadbolt alongside them.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.