Mean Well
Mean Well RS-150-24 2 in 1 accessory 24V 6.5A 156W
24V 6.5A switching supply delivers 156W with short-circuit, overload and over-voltage protection, free-air convection cooling, power-on LED, 100% burn-in test, 105°C capacitors.
- Delivers 156 W continuous power at 24 V 6.5 A
- Built-in short-circuit overload and over-voltage safeguards
- Free-air convection cooling runs silently without fans
- 105 °C electrolytic capacitors rated for long service life
- Withstands 300 VAC surge input for 5 seconds
Power supply for 24 V devices
The Mean Well RS-150-24 is a 156 W switching power supply that delivers 24 V at 6.5 A from a 230 V AC input. It suits integrators and technicians who need a compact DC source for embedded boards, LED strips or industrial modules.
Mounting and connections
The unit weighs 0.7 kg and relies on free air convection, so it requires open space around the chassis rather than forced airflow. Screw terminals accept standard hook-up wire, freeing the builder from proprietary cables or adapter boards.
Thermals and reliability
All capacitors are rated to 105 °C and the supply survives ambient temperatures up to 70 °C at full load. A 300 V AC surge tolerance for five seconds and a 5 G vibration rating protect against line transients and mechanical shock, while the power-on LED confirms operation at a glance.
Highlights
- Delivers 156 W continuous power at 24 V 6.5 A
- Built-in short-circuit overload and over-voltage safeguards
- Free-air convection cooling runs silently without fans
- 105 °C electrolytic capacitors rated for long service life
- Withstands 300 VAC surge input for 5 seconds
Specifications
No published specifications for this item yet.
Questions about this item
How much continuous power can the RS-150-24 deliver before its overload protection engages?
The unit is rated for 156 W continuous output at 24 V and 6.5 A, with overload protection built in.
What temperature can the supply reach when it runs all day in a closed cabinet?
It is rated for an operating temperature up to 70 °C and uses free-air convection cooling with no fan.
What AC mains voltage must be present at the installation site for this supply to operate?
The input is specified for 230 V AC, so the site must provide that nominal voltage.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



