We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Pair of cold-protection gloves with full coating and acrylic terry lining

MCR Safety

MCR Safety N9690FCOXXL Cold Protection Gloves 2XL

SKU CH-5QYH-V5AZY

Insulated cut-resistant gloves with acrylic terry lining meet ANSI/ISEA 105:2016 Level A3 cut and Level 3 abrasion standards plus EN 388 3XX2 and EN 511 X2X ratings

  • ANSI/ISEA Cut Level A3 resists blade cuts during material handling
  • EN 388 abrasion level 3 withstands repeated surface wear
  • EN 511 X2X rating confirms cold-environment insulation performance
  • Acrylic terry lining traps heat while maintaining finger dexterity
  • Full dipped coating on nylon knit seals out moisture and debris

Cold Protection Gloves 2XL

These MCR Safety gloves provide insulated hand protection for cold environments. They meet ANSI/ISEA 105:2016 and EN 388 standards with a cut level A3 rating. The acrylic terry lining adds warmth while the nylon knit shell offers abrasion resistance level 3. Suitable for workers needing dexterity in low temperatures.

Acrylic Terry Insulation

The full dipped coating covers the entire glove surface for enhanced grip and durability. Acrylic terry insulation traps heat without restricting finger movement. EN 511 X2X rating confirms cold protection performance. The double-dipped construction is not used here, keeping the gloves lighter for high dexterity tasks.

Ambidextrous Fit and Compliance

Left and right hand design allows quick donning without sorting pairs. California Proposition 65 warnings apply due to listed chemicals. No additional software or accessories are bundled with this personal protective equipment. Inspect coating integrity before each use in hazardous conditions.

Highlights

  • ANSI/ISEA Cut Level A3 resists blade cuts during material handling
  • EN 388 abrasion level 3 withstands repeated surface wear
  • EN 511 X2X rating confirms cold-environment insulation performance
  • Acrylic terry lining traps heat while maintaining finger dexterity
  • Full dipped coating on nylon knit seals out moisture and debris

Specifications

BrandMCR Safety

Questions about this item

How long will the acrylic terry lining keep its insulating performance before it needs replacing?

The acrylic terry lining is built into the glove and is not a replaceable component; insulation life depends on wear and laundering rather than a scheduled interval.

Which rating — cut level A3 or abrasion level 3 — will reach its limit first during continuous heavy handling?

Both ANSI/ISEA 105 cut level A3 and abrasion level 3 are tested to the same standard; the one that wears first depends on the specific task and contact surfaces.

Do the gloves become excessively hot or cause sweating when worn all day in cold conditions?

The high-dexterity nylon shell with full dip coating and acrylic terry insulation is designed to balance warmth and breathability for extended cold-weather use.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.