We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow knee-length PVC rain jacket with detachable hood and snap front

MCR Safety

MCR Safety 230CM PVC Rain Jacket Detachable Hood Snap Closure .35 mil personal protective equipment

SKU CH-RZ8X-C0XTR

A knee-length waterproof raincoat with detachable hood, snap front, wrist take-up snaps, two patch pockets and ventilated cape back

  • Waterproof PVC on polyester blocks heavy rain
  • Detachable hood with drawstring adapts to changing conditions
  • Snap front and wrist take-up snaps seal out wind
  • Cape ventilated back and underarm vents reduce heat build-up
  • Two front patch pockets keep essentials accessible

230 cm PVC Rain Jacket

The MCR Safety Classic Series rain jacket is a knee-length, waterproof coat made from PVC on polyester backing. It features a detachable hood with drawstring, snap front closure, wrist take-up snaps, two front patch pockets, and a ventilated cape back with underarm air vents. The .35 mil construction provides industrial-grade protection for workers in wet environments. This personal protective equipment is suited for outdoor crews who need full upper-body coverage and ventilation while staying dry.

Capacity and headroom

The PVC and polyester material delivers waterproof performance for sustained rain exposure and general industrial use. The knee-length cut and detachable hood extend coverage to the lower body and head when needed. Ventilation through the cape back and underarm vents helps manage heat buildup during active work. The snap front and wrist snaps allow quick adjustment but are not sealed against high-pressure spray or submersion.

Practical limits of PVC construction

The .35 mil thickness resists tearing and abrasion in typical job-site conditions but will degrade under prolonged UV exposure or contact with harsh solvents. Snap closures can loosen under heavy vibration or repeated snagging, reducing water resistance over time. The polyester backing adds durability yet the garment remains a single-layer barrier, so it is not suited for chemical-splash protection or extreme cold without additional layers. California Proposition 65 warnings apply for cancer and reproductive harm.

Highlights

  • Waterproof PVC on polyester blocks heavy rain
  • Detachable hood with drawstring adapts to changing conditions
  • Snap front and wrist take-up snaps seal out wind
  • Cape ventilated back and underarm vents reduce heat build-up
  • Two front patch pockets keep essentials accessible

Specifications

BrandMCR SAFETY

Questions about this item

Will the snap front and take-up snaps at the wrists work over the gloves I already use on site?

The snap front and wrist take-up snaps are designed to close securely over typical work gloves, letting you seal the jacket without removing your existing hand protection.

How can I confirm the PVC-on-polyester construction is sealing out water after I put it on?

Check that the snap front, wrist snaps, detachable hood drawstring and cape-ventilated back all close without gaps; water should bead and run off the yellow PVC surface rather than soak through.

Does the package include the detachable hood with drawstring and the two patch pockets, or are those separate add-ons?

The detachable hood with drawstring and two front patch pockets are built into the 230C raincoat; nothing extra is required to use them.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.