We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two 10ft RGB 5050 LED strips on reels with USB connectors and a small IR remote

maylit

maylit 20ft LED Strip Light Kit 2x10ft RGB 5050 USB Remote

SKU CH-JM36-YV5BQ

Two 10 ft USB-powered RGB 5050 strips controlled by a single remote for TV backlight or room accent lighting

  • ProtocolPowerline / UPB
  • TypePlug-in Module
  • 20 ft total length covers large areas with two 10 ft rolls
  • One IR remote controls both strips simultaneously or independently
  • 5 V USB power keeps heat low and works with any 5 V port
  • RGB 5050 LEDs provide colour-changing light for TV backlight or room decor
  • Kit includes eight fixed buckles for secure, clean-surface installation

20ft USB LED Strip Kit

This kit includes two 10ft RGB 5050 LED strips powered by any 5V USB port. A single IR remote controls both strips independently or in sync. The low-voltage design runs with minimal heat. Eight fixed buckles are supplied for secure mounting on clean surfaces.

TV Backlight and Room Decor

Suits anyone wanting matched lighting on a 40 to 70 inch TV and a separate area like a desk or cabinet. Not for installations that need mains-voltage power or app-based control. Buyers who require longer continuous runs or weatherproof outdoor strips should look elsewhere.

5V USB Power Requirement

Each strip draws power from a standard 5V USB port, so no dedicated adapter is included. You must provide a port capable of supplying the strips. If your only power source is a mains outlet without USB, this kit will not work without an extra adapter.

Highlights

  • 20 ft total length covers large areas with two 10 ft rolls
  • One IR remote controls both strips simultaneously or independently
  • 5 V USB power keeps heat low and works with any 5 V port
  • RGB 5050 LEDs provide colour-changing light for TV backlight or room decor
  • Kit includes eight fixed buckles for secure, clean-surface installation

Specifications

ProtocolPowerline / UPB
TypePlug-in Module

Questions about this item

How do I install the 5050 LED strips on a TV and what step is often missed?

Clean the surface, attach the eight fixed buckles first, then peel the blue tape and press the strip onto the buckles; skipping the buckles leads to poor adhesion.

What maintenance will the USB-powered 20ft kit need over time?

The 5V strips produce extremely low heat, so only occasional dusting is required; no bulb replacements or driver servicing are needed.

What limit appears first when the two 10ft rolls run continuously at full brightness?

The 5V USB power source reaches its current limit before the strips overheat, causing dimming or shutdown under sustained maximum load.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.