Maxxima
Maxxima MWL-28 Round Work Light 1200 Lumens
Round LED work light delivers 1200 lumen flood output with IP67 sealing for 12 or 24 volt vehicle systems
- ColorBlack
- IP67 rating withstands dust and water ingress
- 1200 lumen LED output delivers bright flood illumination
- 12/24V DC operation suits wide vehicle range
- Bolt-on bracket enables permanent mounting
- IESNA LM-79 tested for verified photometric performance
Purpose-built vehicle work light
The Maxxima MWL-28 is a round LED work light rated at 1200 lumens for vehicle classes 1 through 8. It operates on 12 or 24 V DC systems and meets IESNA LM-79 photometric standards. The IP67 rating confirms protection against dust and temporary immersion.
Rugged housing with permanent mounting
A black polycarbonate body and clear lens form a compact round head measuring 4 11/16 in diameter and 1 5/8 in depth. Installation is permanent via a bolt-on bracket and the electrical connection uses blunt-cut wires supplied with the unit. The flood beam pattern spreads light widely across the work area.
Flood beam and IP67 sealing decide fit
The single specification that determines suitability is the fixed flood beam combined with IP67 ingress protection. Buyers who need a focused spot pattern or a portable magnetic mount will not be served by this design. The blunt-cut wiring also requires the installer to terminate connections.
Highlights
- IP67 rating withstands dust and water ingress
- 1200 lumen LED output delivers bright flood illumination
- 12/24V DC operation suits wide vehicle range
- Bolt-on bracket enables permanent mounting
- IESNA LM-79 tested for verified photometric performance
Specifications
| Color | Black |
|---|---|
| Brand | MAXXIMA |
Questions about this item
What does the IP67 rating mean for this work light?
IP67 means the housing is dust-tight and can survive temporary immersion in water up to one metre deep.
What mounting hardware does the MWL-28 require?
It mounts with a bolt-on bracket that attaches to a flat surface on the vehicle or structure.
How do I wire the blunt-cut leads for 12 V or 24 V DC?
Connect the positive lead to switched power and the negative lead to chassis ground; the light operates on either voltage without extra steps.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Zoro Select Probe Covers 15-617-000 PK500 Transparent
- Transparent
HealthSmart 18-220-000 Infrared Digital Thermometer Gray/White
- Gray/White
HealthSmart Foods, Inc. 04-655-001 Digital Blood Pressure Monitor Arm Adult Black
- Black



