Maxxima
Maxxima MTBL-10-A Work Light 3000 lm Rectangular LED 10 in
Rectangular LED work light delivers 3000 lumens with IP67 protection for permanent mounting on universal vehicles
- 3000 lumen flood beam lights large work areas
- IP67 rating resists dust and water ingress
- 8 V DC power suits vehicle electrical systems
- Bracket mount enables permanent installation on multiple surfaces
- Meets IESNA LM-79 photometric testing standards
Work light for vehicle classes 1–8
The Maxxima MTBL-10-A is a rectangular LED fixture delivering 3000 lumens in a flood beam pattern. It is built for permanent mounting on universal vehicle types across classes 1 through 8. The IP67 rating confirms protection against dust ingress and temporary water immersion.
Bracket mount with 2-pin connector
Installation uses the included bracket and a 2-pin PED connector wired to a 12.8V DC system. The permanent mount type requires a secure fastening surface and correct polarity on the two-pin plug. Wiring errors or loose bracket bolts are the most common causes of early failure or intermittent operation.
3000 lumen flood output at 12.8V
The light produces a wide flood beam rated at 3000 lumens when supplied with 12.8V DC. Output drops if the vehicle charging system runs below that voltage or if the lens accumulates heavy grime. It is not suited for applications requiring a focused spot pattern or higher intensity than the rated lumen figure.
Highlights
- 3000 lumen flood beam lights large work areas
- IP67 rating resists dust and water ingress
- 8 V DC power suits vehicle electrical systems
- Bracket mount enables permanent installation on multiple surfaces
- Meets IESNA LM-79 photometric testing standards
Specifications
| Brand | MAXXIMA |
|---|
Questions about this item
How do I confirm the 3000 lm LED flood beam is performing correctly after permanent bracket installation?
Verify the IP67-rated housing shows no moisture ingress, the 12.8V DC supply is stable at the 2-Pin PED connector, and the rectangular head illuminates evenly across the 29 1/2 in work area.
What ships with the MTBL-10-A and what must I source separately?
The unit includes the IP67 rectangular LED head, permanent-mount bracket, and 2-Pin PED connector; you must supply a 12.8V DC power source and any wiring needed to reach the vehicle electrical system.
Which specification matters most when choosing between vehicle classes 1 through 8 for this universal work light?
Match the 12.8V DC operating voltage and 3000 lm flood output to your vehicle’s electrical system; the IP67 rating and permanent bracket mount fit all listed classes without modification.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
