Maxxima
Maxxima MHLE-07HILO-MH LED headlamp high/low beam heated 7in 12 bulbs IP67
7-inch round LED headlamp with 12 bulbs, heated lens, high/low beam and IP67 rating
- Heated lens clears ice and snow
- High and low beam from 12 LEDs
- IP67 rating seals out dust and water
- Universal fit for vehicle classes 1 through 8
- H4 3-pin connector enables direct installation
7-inch LED headlamp with 12 bulbs
The Maxxima MHLE-07HILO-MH is a round 7-inch LED headlamp designed for universal fitment on Class 1 through 8 vehicles. It delivers both high and low beam functions from a single polycarbonate housing rated IP67 for dust and water resistance. The unit includes a heated lens to maintain output in freezing conditions. A supplied H4 3-pin connector and bracket allow direct surface mounting without extra adapters.
High and low beam capacity with heated lens
Twelve LEDs provide illumination for high and low beam duties across a wide range of commercial and utility vehicles. The heated lens clears ice and condensation that would otherwise reduce output in sub-zero temperatures. IP67 sealing protects the emitters and electronics from pressure washing and road spray. The polycarbonate housing resists impact but will not survive sustained off-road debris strikes beyond its rated class.
Universal bracket mount with H4 connector
The surface-mount bracket bolts directly to existing headlamp buckets or flat panels on trucks, buses and heavy equipment. The included H4 3-pin plug connects to standard vehicle harnesses without splicing. Heated-lens operation draws additional current, so the vehicle charging system must support the extra load. No ballast, driver module or separate wiring loom is required beyond the factory circuit.
Highlights
- Heated lens clears ice and snow
- High and low beam from 12 LEDs
- IP67 rating seals out dust and water
- Universal fit for vehicle classes 1 through 8
- H4 3-pin connector enables direct installation
Specifications
| Brand | MAXXIMA |
|---|
Questions about this item
Will the H4 3-pin connector on this 7 in headlamp plug into the existing wiring on my older Class 4 truck without an adapter?
The headlamp includes an H4 3-pin electrical connection that matches the standard socket used on many Class 1 through Class 8 vehicles, so it should connect directly to factory wiring on older trucks in those classes.
How can I verify the heated lens is actually clearing ice after I install the MHLE series unit?
Switch the lamp to low beam in freezing conditions; the built-in heating element activates automatically and you should see the polycarbonate lens clear within a few minutes.
Does the box contain the surface-mount bracket and wiring pigtail, or do I need to order them separately?
The package includes the round LED headlamp with 12 bulbs, the surface-mount bracket and the H4 3-pin electrical connection; no extra mounting hardware or wiring is required.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



