We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black main harness blunt cut wire 3-13/64 inches long

Maxxima

Maxxima M50956 Main Harness Blunt Cut 3-13/64 In

SKU CH-XBZP-Q12F1

A blunt-cut main harness activates additional lights when the master lamp illuminates, supporting LED or incandescent bulbs with 18 AWG copper conductors in a 3-13/64 inch length

  • ColorBlack
  • Blunt-cut design enables quick custom wiring
  • 3-13/64 inch length fits tight dash spaces
  • Supports up to six 18 AWG circuits
  • Activates multiple lights from one master signal
  • Works with LED or incandescent combinations

Main Harness 3-13/64 In Length

The Maxxima M50956 is a main harness with a blunt cut design measuring 3-13/64 inches in length. It suits installers wiring LED or incandescent lights in automotive applications. The harness activates one or more lights once the master light is illuminated. Color-coded connectors simplify identification during installation.

Thermals Noise Power Draw

The harness supports a maximum voltage of 12.8 volts with wire sizes fixed at 18 AWG. Copper stranded wire carries current between the minimum five and maximum six wire combinations. No active cooling or moving parts exist, so thermal output and acoustic noise are negligible. Power draw depends entirely on the connected lighting load.

Blunt Cut Color Coded Wiring

Blunt cut ends allow direct splicing into existing vehicle circuits without proprietary plugs. Color-coded insulation matches standard automotive wiring conventions for faster termination. The harness works with LED or incandescent lights in any combination, removing the need for separate adapters. Physical dimensions are 3-13/64 inches long by 39/64 inches high.

Highlights

  • Blunt-cut design enables quick custom wiring
  • 3-13/64 inch length fits tight dash spaces
  • Supports up to six 18 AWG circuits
  • Activates multiple lights from one master signal
  • Works with LED or incandescent combinations

Specifications

BrandMAXXIMA
ColorBlack

Questions about this item

How do I install the Maxxima M50956 main harness with its blunt-cut wires, and what step is often missed?

Strip each 18 AWG copper stranded wire, match the colour-coded conductors to your lighting circuit, crimp or solder the connections, then insulate; the step often missed is verifying the master light triggers the harness before finalising the install.

What maintenance or replacement will the Maxxima M50956 harness need over time?

Inspect the 3-13/64 in harness periodically for chafed insulation, corroded crimps or loose strands; replace the entire harness if any 18 AWG conductor shows damage, as individual wires are not serviceable.

What limit appears first when the Maxxima M50956 harness runs continuously at full load?

The 12.8 V maximum voltage rating is the first limit; sustained operation above that level can overheat the 18 AWG copper conductors and degrade the blunt-cut connections.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.