We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Round amber LED warning light with PL-3 connector

Maxxima

Maxxima M42701Y Round Amber Warning Light

SKU CH-4JPX-0PACE

Round amber LED warning light with SAE J595 Class 2 rating, IP67 sealing and 12/24 V operation for permanent vehicle mounting

  • ColorAmber
  • SAE J595 Class 2 certified for regulated visibility
  • IP67 rated for dust and water protection
  • 12/24V DC operation suits diverse fleets
  • LED flashing light increases peripheral awareness
  • PL-3 connector enables permanent installation

Round amber warning light

The Maxxima M42701Y is a round perimeter flashing warning light designed for facility and traffic safety applications. It uses LED technology with an amber lens and emits an amber flash pattern. The unit carries an SAE J595 Class 2 rating and connects via a PL-3 connector for permanent installation on universal vehicle types.

Thermals noise and power draw

Operating on 12/24V DC, the LED light draws minimal current and produces negligible heat during normal operation. Its solid-state design has no moving parts, so it runs silently without fan noise. The IP67 rating confirms the sealed housing resists dust and water ingress, protecting internal electronics from environmental stress.

Sustained load behaviour

Under continuous flashing the LED array maintains consistent output without thermal throttling or colour shift. The IP67 enclosure prevents moisture or debris from degrading performance over long duty cycles. The single-head unit is built for permanent mounting and steady operation in fixed-site or vehicle-mount safety roles.

Highlights

  • SAE J595 Class 2 certified for regulated visibility
  • IP67 rated for dust and water protection
  • 12/24V DC operation suits diverse fleets
  • LED flashing light increases peripheral awareness
  • PL-3 connector enables permanent installation

Specifications

ColorAmber
BrandMAXXIMA

Questions about this item

How do I install the Maxxima M42701Y warning light permanently and what step with the PL-3 connector is often missed?

Mount the round housing securely, route the cable to a 12 or 24 volt DC supply, then fully seat the PL-3 connector until it clicks; the click confirms the weather seal is engaged.

What maintenance will the LED warning light need over time?

The sealed LED module requires no bulb changes; periodically wipe the amber lens clean and inspect the PL-3 connector and cable for damage to maintain the IP67 rating.

What limit appears first when the light runs continuously on a vehicle?

The SAE J595 Class 2 rating defines the maximum permitted flash intensity; the light will not exceed that output even during sustained operation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.